NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Idling issues...car dies randomly (https://www.nopistons.com/3rd-generation-specific-18/idling-issues-car-dies-randomly-70285/)

Ranger 07-19-2008 03:24 PM

Less than a month after buying it and I'm already having problems https://www.nopistons.com/forums/pub...IR#>/wacko.gif Not unexpected though https://www.nopistons.com/forums/pub...IR#>/smile.gif



Some related background info...car has a Power FC, and the previous owner said that the vaccuum lines were freshly routed by a shop in NC called Rotorsports. The other day, a coolant hose burst under WOT. I replaced the hose and made sure the clamps were tight as I could get them. I'm not sure what exactly it goes to, but it's the big one that's right by that black vaccuum box on the front of the engine, by the plenum. I'll try and take a picture later.



Anyway, ever since then, I have had problems getting the car to idle, and it's very random. Sometimes it will idle just fine for however long I want until I have to shut the car off. Other times, it will die right away (at a stop light, etc.). Other times, it will idle for 30 seconds to a minute then die. And when I say die, I mean it's as if I shut the car off. It doesn't bog or anything, it just completely dies. However if I catch it and give it gas, it'll keep running. What's weird is that if I give it throttle while at a stop, any throttle at all, it won't die. So I thought maybe it's a tuning issue, but really I don't know, because it worked fine before that issue with the coolant hose.



So, any ideas? I'd appreciate any help...

mirandama1 07-21-2008 02:17 AM

You and me both brother!! I'm going thru the same crap as you over here in Japan. Can anyone help us?? https://www.nopistons.com/forums/pub...R#>/unsure.gif

JBs93FD 07-21-2008 08:55 AM

I ran through the same problem with my fd, i run the aem ems and it would randomly die, i check for loose connections and found nothing. i ended up sending the ems to aem and they found the prom chip loose the sent it back and i havent had a problem yet. try shaking your powerfc and see if you can duplicate the problem.

Ranger 07-28-2008 04:01 AM

I will try that. I believe this is an electrical issue as you can see all lights going dim, etc. when it dies. I've also noticed that my Power FC commander has some weird issues, such as the contrast of the LCD display changing from time to time on its own, so it could be something bad with the Power FC. Going to check the TPS, ISC, etc. tomorrow.

willyfd 08-10-2008 09:03 PM

I had this problem..a friend told me to check the maps again in my power fc and some how the a/f mixture was incorrect..some how it changed on its own..reinstalled the data and hey its working like a champ..so check your map it might help.


All times are GMT -5. The time now is 02:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands