Ok how hard would it be to change the engine wiring harness and master brake cylnder? also take into account if i had the repair manual for an FD. Thanks

master cylinder is easy. Engine harness would be a pain though.



Depends on skill level and what tools you have

tools would not be a problem, my brother is a mechanic with about any tool possible. also i looked at a picture of the car and it might not be all of the wires. i just wanted to know because i can afford the car so i have to convice my parents. so just wanted to know. thanks

The engine harness goes from the passenger kick panel through the firewall behind the ABS. Thats the hard part. Its probably a 6 hour job the first time you do it.



Master cylinder is about 1 hour since you have to bleed everything afterwards

Working on Fds must be fun https://www.nopistons.com/forums/pub...DIR#>/wink.png

it always is (damn mazda engineers...https://www.nopistons.com/forums/pub...DIR)

if ur car is non seq.. take you about 30 min..lol

I'd like to see anyone do a FD engine wiring harness in 30 min.

considering : single turbo / non seq .... no ps.... no ac....no rats nest...



it should take around 25