NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   How can I throw flames from my tailpipe? (https://www.nopistons.com/3rd-generation-specific-18/how-can-i-throw-flames-my-tailpipe-55542/)

psyclo 12-06-2005 06:39 PM

Really spicey burritos, that will get flames to go out your tailpipe.

nopistons94 12-06-2005 06:40 PM


Originally Posted by psyclo' post='784367' date='Dec 6 2005, 07:03 PM

Do FDs have the dashpot on the throttle to slow the close of the buterflys? If so removing that will help make the rich conditon you so desire. That and having a non-recurculating BOV, not sure again if FDs had those (I assume they did).





1.FDs have a MAP sensor not a AFM , having a open BOV makes no difference.



2.No

RE-Amemiya7 12-06-2005 06:41 PM

Oh yeah, that happens to me every time I eat Qdoba and BW3's in the same day.....stay away from open flames,wooooooo!

sweet7 12-06-2005 09:21 PM

LMAO the flame thread, havent seen this one in a long time!

Signal 2 12-07-2005 07:34 AM


Originally Posted by RE-Amemiya7' post='784303' date='Dec 6 2005, 01:01 PM

One of the reasons why I fell in love the FD was because it could throw flames! This is something I want to be able to do. How can I throw flames like this, Ok this is a little big, but I just want to throw at lest some flames when I get off the gas from WOT.

My stock wastegate has been ported and can most likely keep the car at a consistent 10psi without the main-cat, can I throw flames with a stock fuel system and resonator pipe in place of the main-cat?



Not sure about a resonated midpipe. You MIGHT have been able to do it on a stock ECU with just a straight pipe, but that's dangerous, and not because it's a fire hazard.

Maybe reposition the IAT to the stock elbow to avoid any heatsoak and see the coolest temps. That would tend to make it run richer. https://www.nopistons.com/forums/pub...IR#>/dunno.gif

teknics 12-07-2005 05:42 PM

i made my flames with downpipe,midpipe, RB catback, walbro fuel pump, BOV, and an intake..... wasnt that hard but alas i cant find the videos anywhere so theyre lost permanently i guess unless someone else has them. wish i had them somewhere.

j9fd3s 12-07-2005 10:45 PM


Originally Posted by RE-Amemiya7' post='784377' date='Dec 6 2005, 04:36 PM

Sounds safe, Its worth a try!



But seriously, with the stock fuel system and no main-cat can I get some flame out my tailpipe?



yeah nothing dramatic though



you want drama forget to turn decel fuel cut off on the haltech and then let off the gas @redline, you could see orange in the mirror.... movies at some point

treceb 12-08-2005 11:17 AM

the fun factor ends when you see flames bout 4 inches above the R1 wing which dont seem to want to extinguish....once i stepped on the gas to try and stop it and it just created a flame thrower like burst...

teknics 12-08-2005 02:46 PM


Originally Posted by treceb' post='784783' date='Dec 8 2005, 12:17 PM
the fun factor ends when you see flames bout 4 inches above the R1 wing which dont seem to want to extinguish....once i stepped on the gas to try and stop it and it just created a flame thrower like burst...



my flames used to come up and over the stock t2 wing, dance around for a little while etc. i also melted part of the plastic on a ford expedition which was too close to me at a light.



kevin.

boxrs4sale 12-08-2005 02:58 PM

BAHAHAHAHAHAHAHA


All times are GMT -5. The time now is 03:05 AM.


© 2024 MH Sub I, LLC dba Internet Brands