is anyone familiar w/ the connectors on my battery harness?? This is what i have plugged up so far(including on the battery side) I'm not sure what plug 1 and plug 2 are... some assitance is appreciated...

oh and if some that i labeled are wrong.. please let me know... thanks guys!!!



http://www.jayspec7.com/myrx7pics/wi...tt_harness.jpg

identify the colors on the connectors in question...



i can confirm without lookin at the car ..

is that the plugs that run to the ac compressor...

the connector that runs from the harness is white....plug 2 perhaps

and leads into a blue connector and a white smaller one...



the one you have labeled ac compressor leads to power steering



plug one looks like a ground strap

plug one connects to the coolant buzzer...



plug two is either the powersteering or a/c.. you'll know when you place the harness on the car.. but plug one is definatly the coolant buzzer.. if you don't connect it up to the one on the main engine harness you will hear the buzzer all the time.

Thanks guys... i'm going to try it out.... I'll also put this on my site after I fix it from being hack.. https://www.nopistons.com/forums/pub...O_DIR#>/11.gif



here is an updated pic as of right now...



http://www.jayspec7.com/myrx7pics/wi...t_harness1.jpg

u should also label that itty bity one by the starter for the coolant guage thermosensor. i can see it.. heh

I thought that connected to the starter?

I still have the pics i took of my harness for you.

yeah it is... the one for the starter... but there should be another female spade connector by the oil pressure sender for the coolant gauge thermosensor..