alright heres the deal, my clutch has 0 pressure on it, it either goes in and stays in or goes out and stays out. feels like theres nothing holding it back at all. I opened up the bleeder on the clutch slave and nothing came out at all. whats the fcuking deal ???

it's full of air

bleed it.... jay bleeded my clutch, and now its working

ive got bigger problems then that lol

clutch fork, bad slave/master, or it seperated from the pressure plate may have spit the rod out also. souds like it needs to be bleeded lie vr6 said

havin just swapped out your slave..

as jay indicated... its air..

have fun, fd's take a while to bleed https://www.nopistons.com/forums/pub...#>/biggrin.png

amen to that.



Here is my "trick" get a brake bleeder, or some type of fluid pump. take the cap off the master, attach a hose to the OPEN bleeder on the slave. pump fluid through the bleeder. This will force all the air up and out the top of the master. I do this on every car to come into my shop. good pedal first time, every time https://www.nopistons.com/forums/pub...IR#>/bigok.gif