NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Fuel System Overhaul (https://www.nopistons.com/3rd-generation-specific-18/fuel-system-overhaul-20621/)

helihansen 07-11-2003 09:49 PM

I am looking at upgrading my secondary injectors and am in need of advice as far as what I should use cc wise and also what any suggestions would be for gear to use. I currently have a pettit unlimited ecu with fulll exhaust and all the normal bolt ons except for Fmic which I will be installing shortly. I thought Jay (TurboVr6) did write up on his install but I havnt been able to find it. Oh yeh I already have a supra TT pump. Thanks!! https://www.nopistons.com/forums/pub...IR#>/bigok.gif

vosko 07-11-2003 09:57 PM

if you want to put larger secondaries..... i'd go for the 1600's and a powerFC. if you want drop in's you can get your 850cc bored out to 1300cc.... i like the idea of brand new fuel injectors though

Fd3BOOST 07-11-2003 10:15 PM

Does anyone know exactly what a Pettit unlimited is tunned for/to?

I thiough the standard upgrade was 850 primary and 1600 secondaries..

vosko 07-11-2003 10:19 PM

pettit unlimited is tuned to every bolt on upgrade and ported engine. it basically runs the stock fuel injectors up to 100% duty cycle so it won't lean out!



most people go 550/1600's



i went 750/1600's.......

helihansen 07-12-2003 08:30 AM

So what do you guys think of me using 850's primaries and 1600 secondaries? Also does anyone have a good write up of installing regulator and braided lines with fuel rail? Thanks Ps the reason I am persistant on using 850 primaries is because my 550's are leaking right now.

vosko 07-12-2003 09:45 AM

if you buy keith's rails you can buy brand new top feed injectors CHEAP

helihansen 07-12-2003 12:30 PM

Im awaiting a reply from pettit so I know what the capabilities are of my ecu. That is unless any of you are certain and can share some info https://www.nopistons.com/forums/pub...IR#>/bigok.gif

rfreeman27 07-12-2003 02:17 PM

pettit's ecus cant adjust for bigger injectors

helihansen 07-13-2003 11:39 AM

So pettit says "unlimited" but obviously there has to be mods you cant do under ecu limits. Anyone know the extent of what i can do with this ecu?

amp 07-14-2003 03:15 AM


Originally Posted by vosko' date='Jul 11 2003, 09:57 PM
....if you want drop in's you can get your 850cc bored out to 1300cc.... i like the idea of brand new fuel injectors though

sr motorsports sells brand new 1300cc..

they are brand new factory 850cc bored out..

so in essence..they are brand new injectors..

pending on your application.. 1300cc can provide enough fuel..

considering youve mapped out your pump and regulator to adjust..


All times are GMT -5. The time now is 05:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands