NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Fuel Line How Tos? (https://www.nopistons.com/3rd-generation-specific-18/fuel-line-how-tos-28418/)

Danno 11-10-2003 04:43 PM

Anyone know where to get information on replacing the fuel lines or a diagram for it? I have fuel leak and I want to juts replace all the fuel lines I think. Any sugestions?

andynogo 11-10-2003 06:42 PM

Intake pipe off, throttle body off, upper inlet manifold off.



Then replace firewall to engine hoses and the hoses on the engine as well.



Look at the pulsation dampener (on the end of the fuel rail that points towards the back of the engine) cos they can leak too.



Have fun!

Danno 11-10-2003 11:05 PM

Cost $$$$ ??

jspecracer7 11-11-2003 03:34 AM


Originally Posted by Danno' date='Nov 11 2003, 02:05 PM
Cost $$$$ ??

go to any automotive parts store and ask them how much fuel line costs per foot. Then buy about 4 foot of it. That should be plenty. Also buy a good razor blade/utility knife to cut it with. While your at it, buy some good hose clamps.

Danno 11-11-2003 12:31 PM

What size is the line because I can get it for free at work. Its just you typical rubber line right?

andynogo 11-11-2003 06:47 PM

It is high pressure fuel hose for fuel only at high pressure alright? https://www.nopistons.com/forums/pub...IR#>/wacko.png



Can't remember size. Take off one of the firewall to engine hoses and take it to your work...(if you actaully have proper fuel hose there?)

Danno 11-12-2003 10:11 PM

I guess i will have to go buy it. I am going to do the work this weekend . Thanks for the help. Anyone go some other suggestions?

jspecracer7 11-13-2003 02:26 AM


Originally Posted by Danno' date='Nov 12 2003, 03:31 AM
What size is the line because I can get it for free at work. Its just you typical rubber line right?

NO, it's not regular rubber hose.

FikseRxSeven 11-13-2003 08:25 AM

something im gunna try to conquer this weekend, too..... i am prepared to replace the fuel pulsation dampener though, its a 130 dollar peice shipped, just about every reliable person i know that i asked about the fuel smell in my engine bay said its 99% chance that its the fpd. for your sake i hope your problem is just the line

FikseRxSeven 11-13-2003 08:25 AM

oh yeha one more thing..... how do you take the pressure out of the fuel lines?


All times are GMT -5. The time now is 06:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands