NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Did I Waste? (https://www.nopistons.com/3rd-generation-specific-18/did-i-waste-9987/)

Dumbrotorkid 12-29-2002 11:27 PM

i bought the turboxs standard boost controller.i figured i needed somethin until my powerfc is in.was that a good move or am i just wastin money?

rxpower 12-30-2002 05:11 AM

:bigthumg:

I don't know but thats a phat avatar

how much did you waste?

Dragon 12-30-2002 10:53 AM

It should work.. and should be easy to sell later on to some of the nissan boys with no $.. https://www.nopistons.com/forums/pub...#>/biggrin.png

Dumbrotorkid 12-31-2002 11:47 PM

i wasted 79 dollars...and thats my chicky...as soon as it stops rainin the photo shoot for the calender begins



https://www.nopistons.com/forums/pub...DIR#>/moon.gif https://www.nopistons.com/forums/pub...IR#>/boink.gif

Silver Ninety Three 01-03-2003 01:25 AM

Nevr saw the point of manual boost controllers. I always have to play with my profec to compensate for weather. Would be too much of a pita to go under the hood every time.

MaTT_FoULk 01-03-2003 02:01 AM

Manual boost controllers are more reliable, and also cheaper thats the point.

r_xplicit 01-04-2003 08:32 AM

to me it seems as if there is the same margin for error with the manual BC as compared to an electronic one. i mean reall, there are plenty of folks who run the line into the cab so that it can be adjusted, and then the lenght of the vacuum line is lengthened, and to me, the actual VS. realized boost is compromised...........too much line out between the guage and the controller. my avc-r reads right off of the map sensor, and is spot on...





louis


All times are GMT -5. The time now is 08:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands