Well, I've seen this unit on two other FD's here in Japan(Dragon and Igy on the Fascist Forum).

I asked them "why". Well, it turns out that when you push the brake pedal down, some of your force to push it also travels to the firewall, causing it to "flex". You can test this out by having someone sit in the driver's seat and push the pedal down. Watch the brake master cylinder move closer to the strut tower! I installed it, and took it for a spin.



The first thing I though was whoa!...I pushed the brakes down and I immediately stopped. Kind of like I had just bled the brakes. The brakes felt more responsive coming out of the parking lot! I drove it around a bit, and made sure I hit the brakes hard. The brakes seemed quicker to respond, but felt as if it had no overall effect on braking i.e. brake distance.



Good little unit. Cost me a whole $50. I'm sure something can be fabricated for the U.S. units! https://www.nopistons.com/forums/pub...#>/biggrin.png

Could you get a closer less obstructed pic? I can't really see whats going on.

I would normally run out there, but it's raining REALLY hard right now...winds are blowing out of control...AND it's night time!



Let me see if I can sneak the camera out! https://www.nopistons.com/forums/pub...1047683785.gif

Whoa!...Forget that ****!!! I almost fell on my ass from the winds! How about tomorrow!

Man it looks like a good idea. When you come over we will make a few US MODELS. -_-

Yep, NO problemo. We could do some Home Depo shopping to make it work! It's a really easy mod to do...like OUR engine torque braces! Best $5 I spent! https://www.nopistons.com/forums/pub...#>/biggrin.png

I heard that. That is like my favorite mod that I have done. Oh and the MOTOR is nice too. https://www.nopistons.com/forums/pub...R#>/mellow.png

LOL...doing up motors...I have to bring mah book to do that :P

LOL...doing up motors...I have to bring mah book to do that :P[/quote]

if you wanna build an engine you can do my TII https://www.nopistons.com/forums/pub...DIR#>/wink.png

LOL...doing up motors...I have to bring mah book to do that :P[/quote]

if you wanna build an engine you can do my TII https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

sure!...but I'll need more than a day to do it... <_<

LOL...doing up motors...I have to bring mah book to do that :P[/quote]

if you wanna build an engine you can do my TII https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

sure!...but I'll need more than a day to do it... <_<[/quote]

we can just chop up some rubber bands for coolant seals https://www.nopistons.com/forums/pub...IR#>/smile.png

LOL...doing up motors...I have to bring mah book to do that :P[/quote]

if you wanna build an engine you can do my TII https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

sure!...but I'll need more than a day to do it... <_<[/quote]

we can just chop up some rubber bands for coolant seals https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

Actually, I HAVE seen someone reuse the outside water seal. The engine actually held up!...of course, the car was bridgeported with a T-45S...the engine life wasn't meant to be more than 24 hrs of hard running.. :o

LOL...doing up motors...I have to bring mah book to do that :P[/quote]

if you wanna build an engine you can do my TII https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

sure!...but I'll need more than a day to do it... <_<[/quote]

we can just chop up some rubber bands for coolant seals https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

Actually, I HAVE seen someone reuse the outside water seal. The engine actually held up!...of course, the car was bridgeported with a T-45S...the engine life wasn't meant to be more than 24 hrs of hard running.. :o[/quote]

oh well........ still pondering https://www.nopistons.com/forums/pub...>/rolleyes.gif

LOL...doing up motors...I have to bring mah book to do that :P[/quote]

if you wanna build an engine you can do my TII https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote]

sure!...but I'll need more than a day to do it... <_<[/quote]

we can just chop up some rubber bands for coolant seals https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

Actually, I HAVE seen someone reuse the outside water seal. The engine actually held up!...of course, the car was bridgeported with a T-45S...the engine life wasn't meant to be more than 24 hrs of hard running.. :o[/quote]

oh well........ still pondering https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

you know you want the 20b....



mike

You going with 3?

someone got the wheels spinning!

huh? I'm just taking this thread back. https://www.nopistons.com/forums/pub...DIR#>/spam.gif

thats brace is cool, i've seen it on another japanese website.



mike

I orderd one from Andrew... Anyone know where the hell he went?

Ordered one from Andrew??? We made his wtf?