ok i have a stock clutch and everything was fine. 2 days ago i start the car and the clutch pedal is feeling weird. its normal until its almost at the point of engaging and then its pretty stiff. i dont have a clue to what it could be. im not low on fluid either.



-tony

could be the clutch line swelling from the pressure.



you can get stainless lines for cheep.

Or your push fork might be binding.

well... when it rains it fukin pours. slave cylinder went out.but im gettin an act clutch though. there it goes into the fukin money pit

ok just wanted someone elses opinion.my clutch does nothing. i can push it and it returns no big deal. but it wont go into any gear, i can prolly force it into a gear but it feels like the car is goin to jump forward.this would be the release cylinder right?



-tony

Fork or pressure plate/diagram



Does the motor lower its RPMs when pressed in?

My clutch was doing that, replaced clutch and pressure plate to resolve the issue. I think the springs in the pressure plate get weak and that causes it to not fully release.

its was the fork.and my clutch was crap.act is on the way:) street strip so it wont be that bad