i cannot put my car into gear i just bleed it it seems to pull away from the fly wheel when you press the pedal down help please

Maybe it isnt the bleeding and instead the clutch fork. Have you messed with any of the clutch or pressure plate parts?

Did you make sure everything was lined up when you re-installed the tranny/bellhousing? Both inspection plates off right??



GEB.

i just replaced the motor how can i check to see if the clucth fork is the problum what does it look like?? there is a plug on the side of the tranny that is not pluged into anything and another that has a wire broke that one looks like a sensor would these have anything to do with it ?

yes everything lined up all bolts are in

Stick your hand in the service hole. Their should be a little lever their. When you push it in and out does the clutch engage? Disengage. Does it move freely?

moves in and out

Dang...Im out of ideas

the lever moves in and out the clutch does nothing

When then that might be a problem. If the clutch wont engage when the fork is pressed then their is something wrong. What happens when you put it in gear and move the lever. Will it even let you do that?