Zoom Zoom.
The car is now able to start https://www.nopistons.com/forums/pub...#>/biggrin.png Now I just need to track down a few things, like why my instrument cluster isn't working (tach/odo/speedo) And purchase my pfc sometime this week as well. Anyone here have any suggestions as to why the above mentioned aren't working correctly? The car was previously an auto, switched to a manual and I have a manual cluster but all the plugs looked like they went in correctly. T.c. Oh yeah here's a video of it http://veritas.thinkbsd.com/movies/sockzoom.mpg P.s. Thanks to GreyGTC and company who helped to get my ride working from the nopistons peeps. |
are ya sure ya purchased a working cluster...
|
well, i got error codes:
6 (spedo sensor) 13 28 30 38 one of those is a pressure sensor... where the hell is that at? T.c. |
oh, and im pretty sure the cluster was working before, if you've read any of my other posts you'll find that whoever had this car before hacked the living piss out of it.
T.c. |
might be best to call up malloy mazda and get a new wiring harness if you ever want this car to run right. If i remember correctly it's in the 600 dollar range for the main harness. You might want to look in to doing this...
|
[quote name='nopistons94' date='May 30 2005, 07:59 AM']might be best to call up malloy mazda and get a new wiring harness if you ever want this car to run right. If i remember correctly it's in the 600 dollar range for the main harness. You might want to look in to doing this...
[snapback]718971[/snapback] [/quote] the $600 harness just does the engine. the one that does the body is like $1500... |
[quote name='Veritas' date='May 29 2005, 10:26 PM']Zoom Zoom.
The car is now able to start https://www.nopistons.com/forums/pub...#>/biggrin.png Now I just need to track down a few things, like why my instrument cluster isn't working (tach/odo/speedo) And purchase my pfc sometime this week as well. Anyone here have any suggestions as to why the above mentioned aren't working correctly? The car was previously an auto, switched to a manual and I have a manual cluster but all the plugs looked like they went in correctly. T.c. Oh yeah here's a video of it http://veritas.thinkbsd.com/movies/sockzoom.mpg P.s. Thanks to GreyGTC and company who helped to get my ride working from the nopistons peeps. [snapback]718864[/snapback] [/quote] put in the automatic cluster and see if it works |
it's more than 600 if you aren't a club memeber(the racing club thing, can't remember the name)
and my engine harness is fine, it's my inside harness that's annoying the piss outta me. Also, i don't have the cluster for the automatic :( I've only had the five speed one. Which still would make some sense as my car isn't an automatic anymore and these gauges must of worked at some point in time. T.c. |
[quote name='j9fd3s' date='May 30 2005, 12:08 PM']the $600 harness just does the engine. the one that does the body is like $1500...
[snapback]718974[/snapback] [/quote] yea I know, I said the main harness not the whole harness setup but that is what they probably hacked up the most with the haltec right? |
cleared codes, need my MAP sensor now. The other thing has to deal with emissions, which i could care less for anyways but i'll figure out how to get around that code as well.
T.c. |
[quote name='Veritas' date='May 30 2005, 03:30 PM']cleared codes, need my MAP sensor now. The other thing has to deal with emissions, which i could care less for anyways but i'll figure out how to get around that code as well.
T.c. [snapback]719073[/snapback] [/quote] sounds like a wire is messed up somewhere messing up signal and tripping codes. Same thing happened when I rubbed the wiring harness on one of my otehr cars with my wheel.. Started tripping codes and stuff and I was like WTF, then I looked and saw the damage, repaired it and that was all. So I'd look into the harness first.. |
well the other codes i had were def. due to wires being screwed to all hell. My harness had been chewed up pretty good by the person who had the car previously so.. yeah.
T.c. |
there you go man
|
All times are GMT -5. The time now is 05:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands