NOW... I have some questions.



The idle goes from like 300 to like 2200 and just flutters back and forth like that.. (Like in the end of the video). Is that the PFC trying to learn or someshit? When I FIRST started the car a few weeks ago, it acted normal, then after a second or two, it starting doing the fluttering crap. I've checked for a vacuum leak, and that's not it. Anything else to look for? It's too late now.. And the car is WAY too loud to keep starting.. Thanks for all the help. _)

Maybe adjust the idle screw that's under the TB?? or tps? Im kinda messed up now so those are my guiesses https://www.nopistons.com/forums/pub...DIR#>/beer.gif

describe "fluttering"



You are completely sure you don't have any vacuum leaks? MAP is hooked up? All your rails and injectors have new insulators/orings?



All grounds are good?

Make sure nothing is near the CAS...

Let the car run for a bit and see if its the PFC... if not, try adjusting the TB's adjustment screws.

mine did that after my single conversion for like 5 minutes...i assume it was pfc doing its thing. then it worked fine and i just had to do little adjustments to the idle screw on the tb

I'm POSITIVE there is no vacuum leaks.. There almost can't be. Anyway, the fluttering is just the idle revvs up to 2200, then down.. Up to 2200, then down, and keeps doing that.. https://www.nopistons.com/forums/pub...1047683561.gif



Grounds are good. I actually hate to say that I think that's what fixed the car.. But anyway.. Nothing near the CAS..



Map sensor good.. Injectors and rings good.



I only let id idle for 15-20 seconds.. But it didn't seem to stop. I'll get back to it in the A.M. and see what she does. Thanks!!



Justin

Yeah man the PFC has to learn the sensors and **** like that. Mine took about 45 minutes to learn.

So it acted like a HUGE vacuum leak and all kindza crazyness? I hope it clears up.. I'm SO ready to lay waste to every piece of road I can get near!! https://www.nopistons.com/forums/pub...IR#>/smile.png Ok.. So maybe I'll break it in for a DAY.. https://www.nopistons.com/forums/pub...#>/biggrin.png

wow!!! great to hear that your car is finally running

I got a new tape and a fresh battery whenever u wanna make a movie! https://www.nopistons.com/forums/pub...IR#>/bigok.gif

At least let the motor break in before you paint the streets black.So what was that problem you were having?