Can't Go Above 2500 - 3000 Rpm
05-22-2003, 08:54 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2001
Location: SV, NY
Posts: 2,066
as you know I just started my FD but I can't go above 2500 - 3000, i'm not sure if it's boost related or not and don't know where to start to look..
Here is a vid...
RPM VIDEO
FIRST START UP
Here is a vid...
RPM VIDEO
FIRST START UP
05-23-2003, 01:55 AM
#5
Senior Member
Thread Starter
Join Date: Aug 2001
Location: SV, NY
Posts: 2,066
Originally Posted by amp' date='May 22 2003, 09:17 PM
had somewhat of a similar issue when i left a rag after reassembly..
and new pfc install....it cleared up after learning the car...
and new pfc install....it cleared up after learning the car...
05-23-2003, 02:51 AM
#6
Senior Member
Join Date: Sep 2002
Posts: 2,342
You just put your PFC in?
If so, just let the car run for like 30 mins, shut it off, then start let it run
for 20 mins. Start is up again and 20 mins again. Then start it and start
playing with your tunning if you need it. This is what we did on my car
and it worked out pretty good...
If so, just let the car run for like 30 mins, shut it off, then start let it run
for 20 mins. Start is up again and 20 mins again. Then start it and start
playing with your tunning if you need it. This is what we did on my car
and it worked out pretty good...
05-23-2003, 04:28 AM
#9
Senior Member
Join Date: Sep 2002
Posts: 2,342
OOOOO hummmm and thats it? How long did it run before you started to press on the gas. Most rebuilders here let it idle for almost an hour on a new
motor sometimes more...
Hummmm does sound good, but hopefully your still good to go...
motor sometimes more...
Hummmm does sound good, but hopefully your still good to go...