Hello folks



I have the oppertunity to buy a used pfc from the uk where i live. I recently bought an smb s/s downpipe and midpipe off this guy.

He is now selling this pfc which was mapped for his car which had a large streetport running 1bar boost with 1600 secondarys, twin turbos and the downpipe midpipe i bought off him. All i want to know is will this map be ok on WOT for my car which is standard engine with intake, dp and mid pipe,stock twins and 850cc injectors all round possibly going up to 1200 secondarys if needed to.



Thanks guys

Most likely not, seeing as its setup for a different injector size.



Use a wideband and retune.

Hmm.. how many pounds of boost are you planning to run?

reset the pfc.. set the boost at 10psi.. change your injector settings .. port your wastegate..

you should be able to get away with this until you get it completely tuned..

Agree with amp.. I would definitely not run 15lbs its suppose to be tuned at. I would feel safer to use stock pfc map and run 10-12lbs.