NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Building Up My Fd, Looking For Any Suggestions.... (https://www.nopistons.com/3rd-generation-specific-18/building-up-my-fd-looking-any-suggestions-23461/)

neomicro 08-25-2003 01:53 AM

I am going ahead with a full rebuild on my 94 R2 FD.



Here is the list of what is planned. If anyone sees any improvement or changes let me know before I get started.





Here is a list of parts being added:

Full engine build by Pineapple Racing.

HKS T04R turbo kit with intercooler.

Haltech E6X

RC Engineering 500cc injectors

RC Engineering 1600cc secondary injectors

Aeromotive fuel pump

Aeromotive fuel pressure regulator

Act Xtreme pressure plate, Pineapple Racing clutch disc, Exedy Billet Cromoly Racing Flywheel.

Indigo full pulley kit (removing air pump)

Downpipe, midpipe, catback (the cat back is an Apexi GT)

Mazdaspeed short shifter

HKS Hiper Damper coil overs

M2 Competition trailing arms and toe link set.

Volk 18x10 rear, 18x8 front.



Again, if you see anything that has been overlooked or see room for improvement, let me know. If anyone has experienced problems with any of the mods I am looking at it would be great to find out about it.



Thanks

rx7machine 08-25-2003 09:59 AM

You may want to upgrade your radiator unless you've already done so.. and some gauges won't hurt either.

wraith 08-25-2003 10:26 AM

you REALLY want to upgrade your radiator

snook 08-25-2003 10:48 AM

you know thats gonna cost you about 15k?



for heavily modified cars a radiator is good, I run in the 12s and have the stock radiator it's fine for me and I'm in florida.

chase78 08-25-2003 11:03 AM

HKS CDI ignition



get the most out of your gas and try to burn as close to 100%.



also you get more

HP

MPG

EMISSIONS

neomicro 08-25-2003 11:36 AM

Code:

you know thats gonna cost you about 15k?



for heavily modified cars a radiator is good, I run in the 12s and have the stock radiator it's fine for me and I'm in florida



Radiator is already done. I wish I could keep it under 15K but the parts alone are going to hit me for more.




HKS CDI ignition



get the most out of your gas and try to burn as close to 100%.



also you get more

HP

MPG

EMISSIONS


I was thinking the same thing, something like the HKS Twin Power.

kkw4p 08-25-2003 12:35 PM

Replace the cats with straight pipes if you can. Much better exhaust flow that way. Keeps the heat away from the engine bay too.. which lengthens seal life.

rx7machine 08-25-2003 01:54 PM

Yea, I think I'm also going to go with the HKS twin power ign. Hey, snook, what are your mods?

neomicro 08-25-2003 02:16 PM

One other thing, for seals, I am leaning towards ceramic. Unless there is good reason to avoid these.

rx7machine 08-25-2003 02:20 PM

Humm.. ceramics are porbably not needed unless you're planning on doing some high revving!


All times are GMT -5. The time now is 01:32 PM.


© 2024 MH Sub I, LLC dba Internet Brands