I just got Brembo Cross Drilled/Slotted rotors for all four corners... What pads should I get? Will stock do? Or should I get an upgrade... Also thinking about stainless lines... Opinions? Thanks!!!!!!
|
stock pads are ok. you can put EBC green's i think those are the street pads. SS brake lines are nice but a pain to install.
|
Originally Posted by 9BASE3' date='Jun 15 2002, 06:23 PM
I just got Brembo Cross Drilled/Slotted rotors for all four corners... What pads should I get? Will stock do? Or should I get an upgrade... Also thinking about stainless lines... Opinions? Thanks!!!!!!
|
Originally Posted by 13BAce' date='Jun 15 2002, 08:41 PM
[quote name='9BASE3' date='Jun 15 2002, 06:23 PM']I just got Brembo Cross Drilled/Slotted rotors for all four corners... What pads should I get? Will stock do? Or should I get an upgrade... Also thinking about stainless lines... Opinions? Thanks!!!!!!
I just drive on the street. I'll attend 1/4 events from time to time... Maybe try an autocross... For the most part, I got them because the deal was too good to pass up. I'll prolly just get the stock pads! |
Originally Posted by 9BASE3' date='Jun 17 2002, 01:43 PM
[quote name='13BAce' date='Jun 15 2002, 08:41 PM'][quote name='9BASE3' date='Jun 15 2002, 06:23 PM']I just got Brembo Cross Drilled/Slotted rotors for all four corners... What pads should I get? Will stock do? Or should I get an upgrade... Also thinking about stainless lines... Opinions? Thanks!!!!!!
I just drive on the street. I'll attend 1/4 events from time to time... Maybe try an autocross... For the most part, I got them because the deal was too good to pass up. I'll prolly just get the stock pads![/quote] Yeah, it doesn't sound like you need any heavy duty braking, but the autocrosses may be hard on the brakes. |
Originally Posted by 13BAce' date='Jun 17 2002, 11:48 AM
[quote name='9BASE3' date='Jun 17 2002, 01:43 PM'][quote name='13BAce' date='Jun 15 2002, 08:41 PM'][quote name='9BASE3' date='Jun 15 2002, 06:23 PM']I just got Brembo Cross Drilled/Slotted rotors for all four corners... What pads should I get? Will stock do? Or should I get an upgrade... Also thinking about stainless lines... Opinions? Thanks!!!!!!
I just drive on the street. I'll attend 1/4 events from time to time... Maybe try an autocross... For the most part, I got them because the deal was too good to pass up. I'll prolly just get the stock pads![/quote] Yeah, it doesn't sound like you need any heavy duty braking, but the autocrosses may be hard on the brakes.[/quote] B) |
where did you get your brembo rotors? i have only seen brembo for front applications.. thanks.
|
Kevlar brake pads are great for cross-drilled/slotted rotors.
-r0gu3 |
Get some Hawk pads or PFS pads. THe hawk pads arte nice a don't fade much under extreme braking ...But they throw off a **** load off dust. I would also suggest putting on the stainless lines. If you get lines that are alreay flaared . Installation is not that bad.. 10 min each tire tops..
I believe that you can get the flared Bonez lines from https://www.nopistons.com/forums/pub...IR#>/blink.pngwww.rx7.com |
All times are GMT -5. The time now is 06:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands