I just got a blitz BOV for my rx7 but the manuals are in japanese, so does any one know a site or how to install one thanks.
|
Um, did you get the "rx7" kit?
If so, you just take off the stock one, and put on teh new one... |
post pics of the unit you have, and we can help from there.
|
the rx7 specific kit should look like this when its pieced together minus the boost controller.
http://users.zoominternet.net/~tonytlm2k/bov.jpg |
i got it off ebay and this is what came
http://www.wright-it.com/carparts/rx7bov3.jpg http://www.wright-it.com/carparts/rx7bov1.jpg http://www.wright-it.com/carparts/rx7bov2.jpg does this replace the air bypass valve that is connect to the secondary turbo. thanks |
simple, unhook the CRV line and take teh factory valve out , and put that in its place.....if you have the stock air box, cap off the open end with a robber door stop end or something like that....
|
also, you will need to run a vacuum line from that nipple.....
|
Its the brown valve closest to the airbox. There are two.
|
Yeah, and you don't want to pick the CRV, that's the charge relief valve, and opens when the turbo is transitioning, and you pop the butterflies shut...
The proper hose to connect it to is the hose where the Stock BOV sits... which is the same as the CRV (looks wise) but sits furthest forward towards the airbox... (closest to the airbox) distance wise.. pull the hose off, plug that sucker in, cap the hole left in teh airbox, add / re-engineer the vaccuum hose that went to the stock one to go to the aftermarket one... |
this is about the easiest mod u can do, like they said yank off the old brown bov sitting just above and to the fender side of your intake pipes the vacc hose going into the old bov goes in the new one, the tube to the y-pipe that used to be holding the old bov now becomes home to the new one (wedge it in there). u should cap the air intake but u dont have to and id at least ziptie the bov to somewhere close so it dont rattle around unless it came with a bracket to bolt on somewher
|
thanks guys
|
my bad on teh above, i had a fart, it is the closer of the two, and is slightly higher if i remember correctly...
|
I just got a GReddy BOV - type S, and am confused as to which brown valve thing to replace? Also, mine have two placed for vacuum lines, are they both necessary to use? Thanks abunch.
sirrelix |
You want to swap out the BOV which is the brown thing that is closer to thew front of the car. The other one is the charge relief valve. Anyway just hook the vacum hose to the larger of the two nipples on the greedy unit. Let the smaller nipple vent open air.
|
All times are GMT -5. The time now is 01:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands