Hello people, i am building my 94 rx-7 and the mechanic told me that he'll put 2mm apex seals instead 3mm becuase they will work the same he said, i have done some research, but i cannot really decide which one to choose and what diference can make.. can you guys help me? thank you
|
It's an ongoing argument, the theory being bigger seals are stronger, whether or not they are is the argument. If it were me I would prolly go with the 2mm , wut kind of boost you running?
|
probably 22 pounds on pump gas..
|
What I am curious about is the extra seal surface with a stock metering system, does the seal suface get enough lubrication when changing to 3mm seals, could it lead to premature wear on the rotor housings?
|
from what i know a 3mm seal is only for detination , a 3mm seal will take more ping then a 2mm. however a very good 2mm seal will hold upwords of 45psi. the set i got from alex blackson racing in auzzie land has been tested and has not had any failure at a constant 45psi with a stock 2 piece spring. and as for the 3mm seal there a lil heavier and also causes more friction. you be the judge.
|
[quote name='fc3sboy1' date='Mar 19 2005, 05:38 PM']from what i know a 3mm seal is only for detination , a 3mm seal will take more ping then a 2mm. however a very good 2mm seal will hold upwords of 45psi. the set i got from alex blackson racing in auzzie land has been tested and has not had any failure at a constant 45psi with a stock 2 piece spring. and as for the 3mm seal there a lil heavier and also causes more friction. you be the judge.
[snapback]688141[/snapback] [/quote] any real detonation will kill a 3mm seal too, plus the 3mm seals dont seal as well, and have more friction, take more oil etc etc |
oh and btw 22psi and pump gas will kill whatever seal is in there.
I like the mazda 2mm seal. Best compression and are very strong. Any detonation that will cause failure in a 2mm seal will kill a 3mm seal too. |
damn...i was late on this one. 22 psi on pump?....it's not a DSM damn it....... 15-16 psi on pump is all i'd risk personally, and like they said... whatever will kill a 2mm... will kill a 3mm.
|
[quote name='GreyGT-C' date='Mar 19 2005, 08:28 PM']damn...i was late on this one. 22 psi on pump?....it's not a DSM damn it.......
[snapback]688233[/snapback] [/quote] https://www.nopistons.com/forums/pub...1047683785.gif thats pretty funny, that's about what i'll be turning my dsm upto soon |
22 pounds will be with alcohol injection... that's what the guys who are building the car told me.. probably is not true thank you!!!
|
All times are GMT -5. The time now is 05:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands