1993-1995 rx7 fd3s obd dash connector
 

I am looking for the obd connector for my rx7 motor I have put in a b-series Mazda truck and I would like to have the connector to see if the motor is throwing any codes. Please if you know where I can get one or you have one reply back on here or text me at 3362698207 I work 3rd shift so I'm up pretty much all day and night. Thanks

Re: 1993-1995 rx7 fd3s obd dash connector
 

All obd connectors are the same. Just buy one at the parts store

Re: 1993-1995 rx7 fd3s obd dash connector
 

Ok I'm ready to fire this enigne up and I am missing some electrical parts I'm missing the ignitor for sure and everything on that side like the main relay the circuit opening relay and the diagnostics port pretty much everything on the battery side near the battery is missing I have the positive and negative battery ends with the fuse. Of that attaches to the positive cable for the battery with the 4 big fuses in it but that is the only fuse box I have for this harness I have the complete engine harness with ecu and the dash harness has been. Ur out. But the drivers side harness with the battery cables are where the ignitor should be with the other stuff is missing the plugs have been cut. I know I need the ignitor nd the plug so I can wire it back into the harness but I'm not sure what else I need to run this
motor in this truck??? I know the motor has a fuel pressure regulator on the back of the motor I have a fuel pump I'm going to run I just need to know what all electrical parts I will need to fire her up. Thanks any info will help