I wanna wire in a switch for my fuel pump, so i dont have to worry about it flooding (it does sometimes). Where are the wires located?or what do i need to do to do this? a link would be helpful, or if someone could explain how. i used the search and didnt find much... thanx ahead of time

anyone

Only way I know of doing it, and there are others, there is a relay underneath the driver's side dash. A yellow box, I believe the center wire is the fuel pump, you can run a switch from there. Check the FSM to verify the correct wire before you go cutting though.



- Hand

well that middle wire was the right one. i just wired that in, and mounted it in the dash. works good.