NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Wiper Switch Fix (https://www.nopistons.com/2nd-generation-specific-17/wiper-switch-fix-51805/)

Baldy 08-11-2005 09:21 AM

So my 3rd wiper switch finally died, completely dead. It does nothing. So instead of throwing in yet another used switch, I want to replace the relay in the switch. Where can I buy this, and which one do I buy?

horn4858 08-11-2005 09:29 AM

digikey has it,not certain of which one though.

Baldy 08-11-2005 10:05 AM

Nevermind, found what I needed. For those that want to know, write-ups and relay info can be found here and here.



G6C-2114-US-DC12 made by Omron Electronics Inc (http://www.omron.com/oei/)

Digi-Key (www.digikey.com) (1-800-344-4539) part number Z950-ND



When purchasing from digikey, you have to pay for the item, a $5 small-order fee, and shipping. Icemark (second link at top, mazdamark.com) sells it for less.

phinsup 08-11-2005 10:12 AM

I ordered them from digikey, they got here pretty fast, only downside is they charge you like $5.00 to process the order.



If they are completely dead then both the relays are dead. Make sure you have a good desolderer, will make your life much easier.

Baldy 08-11-2005 10:37 AM

[quote name='phinsup' date='Aug 11 2005, 10:12 AM']I ordered them from digikey, they got here pretty fast, only downside is they charge you like $5.00 to process the order.



If they are completely dead then both the relays are dead. Make sure you have a good desolderer, will make your life much easier.

[snapback]747518[/snapback]

[/quote]

Both relays? Which is the other one? And what exactly is a desolderer?

phinsup 08-11-2005 10:44 AM

There is a back up relay, that is the one speed that you have when your other speeds crap out.



As far as a desolderer, these relays arent plug and play you have to remove all of the solder from the contacts before you can remove the relay, if you don't you can damage the pads around them. A desolderer remove solder.... solder suckers are usually better then the wick method.

Baldy 08-12-2005 07:44 AM

[quote name='phinsup' date='Aug 11 2005, 10:44 AM']solder suckers are usually better then the wick method.

[snapback]747524[/snapback]

[/quote]

Ok, I know what you're talking about. Thanks!

75 Repu 08-13-2005 08:45 PM

SWEET!!! woot .. project..



is there anything like this for the headlight switch ? my damn lights are stuck open..

j9fd3s 08-14-2005 12:25 PM

[quote name='75 Repu' date='Aug 13 2005, 05:45 PM']SWEET!!! woot .. project..



is there anything like this for the headlight switch ? my damn lights are stuck open..

[snapback]748297[/snapback]

[/quote]



we had a customers car like that, turned out to be a burned spot on the board in the wiper switch. i had to fix it with a little bit of wire

75 Repu 08-14-2005 07:58 PM

[quote name='j9fd3s' date='Aug 14 2005, 09:25 AM']we had a customers car like that, turned out to be a burned spot on the board in the wiper switch. i had to fix it with a little bit of wire

[snapback]748405[/snapback]

[/quote]



You mean the headlight switch? ill get a couple of extra ones to play with.. is there a difference from the s4 to s5 switch?


All times are GMT -5. The time now is 09:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands