Will the stock FD wheels fit properly on the FC? Will I need spacers? Anyone know the weight of these wheels?
http://ebay0.ipixmedia.com/abc/M28/_...13b3/i-1_B.JPG |
I know that they fit. There is a guy I know in Fort Worth that has them on his na 2nd gen. Weather they need spacers and how much they wiegh I can't answer because I don't know.
|
they need spacers im not sure on the size though the weight is around 13-15 pounds i think
|
25mm spacers. I used 4 spacers to keep the tracking with in specs. If you don't you'll look like a honda and handling will be very arkward.
Even with the spacers, the car's handling will suffer as it will react awarkard and put more stain of the front bearings. I would do it for show and not performance. That spacers were from H&R 25mm spacer, is more like an adapter which comes with its own studs on the spacer. They are expensive. I have seen a person use mr gasket spacer and that was so close to the shock absorber, any bending of the tire and it will rub the shock. THe H&R spacers are the best cause they are hub centric so they will be balanced. There is also this place that I found after i got my spacers. They look like these. These are custom made. http://wheeladapter.com/ THe weight of the H&R spacers and FD rims is still lighter than a Stock TII rim. C |
Even with the spacers, the car's handling will suffer as it will react awarkard and put more stain of the front bearings. Thanks for the response. I'm quite glad I asked before buying them. The whole idea of purchasing the wheels was for weight savings and performance. I'll keep looking. Thanks again. |
All times are GMT -5. The time now is 11:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands