NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Turning the wheel (https://www.nopistons.com/2nd-generation-specific-17/turning-wheel-55650/)

Zelgadis21 12-11-2005 01:47 PM

Well I start the car and if I turn the wheel to the left or the right the rpm will drop and sometimes stall the car. Any ideas what could be doing this?

nismo convert 12-11-2005 02:02 PM

You have ps? Then it's causing too much drag on the motor.

donhayes 12-11-2005 03:53 PM

turning up your idel will be the quick fix. or don't turn the wheel unless your giving it some gas.

bansheerider29x 12-15-2005 01:03 PM

samething happens to my dads 7 idk thought.

toplessFC3Sman 12-15-2005 10:24 PM

wouldnt a faulty bac valve do this as well? or does the bac not register what the PS pump is doing. In any case, make sure ur power steering fluid is full

teknics 12-16-2005 05:12 PM

what does your car idle at? the P/S will lower your RPMs, the BAC should compensate as it's a load on the engine and i believe the BAC adjusts for all loads. But yea check your P/S fluid, and has it been in an accident at all, or is the feeling of the steering "off" at all? a customer had bent an inner tie rod slightly but it was enough to make the P/S work just hard enough to stall the motor when idling.



kevin.


All times are GMT -5. The time now is 06:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands