I know this topic has been touched many times but I'm on a dialup and don't feel like weeding through the 1000 some odd posts to find it....

have a couple questions...

What size injectors does an 88 turbo II have?

Would it hurt my car or be worth my while to put larger injectors in with the few amount of mods i have?

Where is the cheapest place to buy injectors? Rx7.com has 550cc and 720cc injectors for 122.72 and that is the cheapest I've found so far, haven't looked too too many places though.... (only want new, no used)

550 primary and secondary. if your going to bother upgrading the secondaries. i would go with a k2rd rail, aeromotive fpr, bosch 1600's and a some ss braided lines..... its not cheap but you can never have too much fuel on a rotary https://www.nopistons.com/forums/pub...IR#>/smile.png

BNR

cheapest place for injectors, RC engineering has pretty good prices too, most companies will match prices anyhow.

if you go vosko's route any ford mustang injector will fit in there, you could go for 800, 1000 etc. when the factory upgraded injectors they went to 850's (for the fd), so you should do at least that.



mike

I'd go with the 1600s. 4 720's will max out around 400RWHP. 2 550 and 2 1600 are good for alot more https://www.nopistons.com/forums/pub...#>/biggrin.png

JC Whitney Injectors

Anyone know if those injectors will work in my rex? I'm just looking for something that will get my car running good for now... money is way too tight to be able to afford much of anything else https://www.nopistons.com/forums/pub...O_DIR#>/11.gif