i got my TII to run and idle smoothly at ~ 1500rpm using home made grommets for the fuel injectors. it runs fine BUT i'm pretty sure the turbo shat itself. i think its time to go custom single turbo https://www.nopistons.com/forums/pub...IR#>/smile.png

ok

Get some real grommets.

i don't think the grommets are the problem. i also have NO EMISSIONS NOW. its great. there are two vacuum hoses in my entire engine https://www.nopistons.com/forums/pub...IR#>/smile.png

If the idle is high no matter what then I would say to check out the fast idle cam.

I don't even want to talk about vacuum lines. *grumble* Don't you have an extra turbo hanging around, or did you sell them both?

If the idle is high no matter what then I would say to check out the fast idle cam.[/quote]

can somebody show me a pic ?

i have an extra s5 turbo and manifold but i *think* that one is blowing oil too. just say no to stock turbos!

If the idle is high no matter what then I would say to check out the fast idle cam.[/quote]

can somebody show me a pic ?[/quote]

Go to http://www.rx7turboturbo.com/robrobinette/...ody_coolant.htm for pictures. It's for a 3rd gen, but the setup is the same.

ok i see it

I too was once like you. Well, not really. https://www.nopistons.com/forums/pub...>/rolleyes.gif

I too was once like you. Well, not really. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

:P

Don't you have your stock twins laying around somewhere? https://www.nopistons.com/forums/pub...#>/BURNOUT.gif



C

I thought he sold them already.

i did sell them

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

I'm going away tomorrow. When I come back on Friday I have to do Dave's brakes; pull the motor, transmission, and rear out of my car to put them in the 91 coupe; and put a new motor in Rob's spare convertible. https://www.nopistons.com/forums/pub...>/rolleyes.gif

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

I'm going away tomorrow. When I come back on Friday I have to do Dave's brakes; pull the motor, transmission, and rear out of my car to put them in the 91 coupe; and put a new motor in Rob's spare convertible. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

how long is that going to take? you say "pull the trans. rear, and engine, and put it in a coupe" like you are saying you are going to swap stereo's or something, you must do this way to often.

(P.S. take pictures of this, I wanna see how it is done, so I will know when the time comes for me to do the swap)

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

I'm going away tomorrow. When I come back on Friday I have to do Dave's brakes; pull the motor, transmission, and rear out of my car to put them in the 91 coupe; and put a new motor in Rob's spare convertible. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

how long is that going to take? you say "pull the trans. rear, and engine, and put it in a coupe" like you are saying you are going to swap stereo's or something, you must do this way to often.

(P.S. take pictures of this, I wanna see how it is done, so I will know when the time comes for me to do the swap)[/quote]

Yes, I DO do it way too often. https://www.nopistons.com/forums/pub...#>/biggrin.png It's pretty straightforward because it's all bolt-in work.

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

I'm going away tomorrow. When I come back on Friday I have to do Dave's brakes; pull the motor, transmission, and rear out of my car to put them in the 91 coupe; and put a new motor in Rob's spare convertible. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

what are you gonna do with the vert now ? 20B ? https://www.nopistons.com/forums/pub...>/rolleyes.gif

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?[/quote]

i actually can stop by this weekend. i think my LIM gasket might be blown. i'm gonna get the car to idle at 1500rpm again. you don't have a spare gas tank for a 89-91 TII do you ??? https://www.nopistons.com/forums/pub...>/rolleyes.gif i found one for $50 just have ot pick it up https://www.nopistons.com/forums/pub...#>/biggrin.png

glad to hear the TII is running againg vosko.



any of you guys know where i can find a rebuildable series 5 TII engine. small or long block, as long as the price is right.

Thanks

i some parts to rebuild a S5 TII just needs new rotors and a few new housings https://www.nopistons.com/forums/pub...>/rolleyes.gif

i some parts to rebuild a S5 TII just needs new rotors and a few new housings https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

thats all. if you got busted rotor housings youre gonna throw away, ill take them. hell any rotor housings that would be tossed id take. need a lot of practice.



also, any of you guys know where i can find a good explanation on peripheral porting??



im thinking of a draw/blow(i forget which one it is) through turbo to a weber/dellorto on a 12A pp.



or maybe twin draw/blow through turbo massive bridge port 12A/13B hybrid with this manifold(the manifold on the right)http://ebay0.ipixmedia.com/abc/M28/_...ac4f/i-1_B.JPG



watch out, here i come...

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

I'm going away tomorrow. When I come back on Friday I have to do Dave's brakes; pull the motor, transmission, and rear out of my car to put them in the 91 coupe; and put a new motor in Rob's spare convertible. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

what are you gonna do with the vert now ? 20B ? https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

I'll see. Right now I don't have time to keep messing with it.

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?[/quote]

i actually can stop by this weekend. i think my LIM gasket might be blown. i'm gonna get the car to idle at 1500rpm again. you don't have a spare gas tank for a 89-91 TII do you ??? https://www.nopistons.com/forums/pub...>/rolleyes.gif i found one for $50 just have ot pick it up https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

No gas tanks here. Where did you find one?

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?[/quote]

i actually can stop by this weekend. i think my LIM gasket might be blown. i'm gonna get the car to idle at 1500rpm again. you don't have a spare gas tank for a 89-91 TII do you ??? https://www.nopistons.com/forums/pub...>/rolleyes.gif i found one for $50 just have ot pick it up https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

No gas tanks here. Where did you find one?[/quote]

somebody that lives down by the NJ shore https://www.nopistons.com/forums/pub...IR#>/smile.png i gotta talk to ito today

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?[/quote]

i actually can stop by this weekend. i think my LIM gasket might be blown. i'm gonna get the car to idle at 1500rpm again. you don't have a spare gas tank for a 89-91 TII do you ??? https://www.nopistons.com/forums/pub...>/rolleyes.gif i found one for $50 just have ot pick it up https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

No gas tanks here. Where did you find one?[/quote]

somebody that lives down by the NJ shore https://www.nopistons.com/forums/pub...IR#>/smile.png i gotta talk to ito today[/quote]

$50 is a good price.

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?[/quote]

i actually can stop by this weekend. i think my LIM gasket might be blown. i'm gonna get the car to idle at 1500rpm again. you don't have a spare gas tank for a 89-91 TII do you ??? https://www.nopistons.com/forums/pub...>/rolleyes.gif i found one for $50 just have ot pick it up https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

No gas tanks here. Where did you find one?[/quote]

somebody that lives down by the NJ shore https://www.nopistons.com/forums/pub...IR#>/smile.png i gotta talk to ito today[/quote]

$50 is a good price.[/quote]

yeah. finally a deal https://www.nopistons.com/forums/pub...IR#>/smile.png

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?[/quote]

i actually can stop by this weekend. i think my LIM gasket might be blown. i'm gonna get the car to idle at 1500rpm again. you don't have a spare gas tank for a 89-91 TII do you ??? https://www.nopistons.com/forums/pub...>/rolleyes.gif i found one for $50 just have ot pick it up https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

No gas tanks here. Where did you find one?[/quote]

somebody that lives down by the NJ shore https://www.nopistons.com/forums/pub...IR#>/smile.png i gotta talk to ito today[/quote]

$50 is a good price.[/quote]

yeah. finally a deal https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

Well, go get it already!

I knew it! https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

now get the freaking TII idling https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Why don't you stop by over the weekend?[/quote]

i actually can stop by this weekend. i think my LIM gasket might be blown. i'm gonna get the car to idle at 1500rpm again. you don't have a spare gas tank for a 89-91 TII do you ??? https://www.nopistons.com/forums/pub...>/rolleyes.gif i found one for $50 just have ot pick it up https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

No gas tanks here. Where did you find one?[/quote]

somebody that lives down by the NJ shore https://www.nopistons.com/forums/pub...IR#>/smile.png i gotta talk to ito today[/quote]

$50 is a good price.[/quote]

yeah. finally a deal https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

Well, go get it already![/quote]

i have to wait for the guy to tell me when i can go get it . we both work gotta figure out a compatible time :bigok:

So the original tank is really beyond repair?

So the original tank is really beyond repair?[/quote]

just the top plate is messed up. i figure i'll weld it shut then eventually sump it and run SS braided fuel line from the tank to the engine bay. that's a big project that won't be done for a LONG time

So the original tank is really beyond repair?[/quote]

just the top plate is messed up. i figure i'll weld it shut then eventually sump it and run SS braided fuel line from the tank to the engine bay. that's a big project that won't be done for a LONG time[/quote]

I used to have a sumped 86-88 tank, but I let my friend have it. <_<

So the original tank is really beyond repair?[/quote]

just the top plate is messed up. i figure i'll weld it shut then eventually sump it and run SS braided fuel line from the tank to the engine bay. that's a big project that won't be done for a LONG time[/quote]

I used to have a sumped 86-88 tank, but I let my friend have it. <_<[/quote]

cool