On the TID i think i might try and fab up a new one over christmas break. What kind of materials should i use/need and does anyone have any general ideas or tips on how to fab one up?



Second I have a racing beat MBC with a boost gauge that goes inside the car but i have no clue how to install it. It's got a black and a white line. Where do these go?

Common rule for wiring a gauge



Red 12v+

Black ground

other lighting





usually you can go through a wire off the parking lights to light the gauge.

Well the gauge doesnt light up.



Let me explain it a bit better. It's a small instrument cluster type thing that goes to the left of the steering column under the dash. There is a boost gauge and a knob right next to it. Then there is a black plastic line that is hollow going into the boost knob part, a small connector that goes from the knob part to the gauge part and then a whtie line just like the black one leaving the gauge.

pics?

...

...

...

get a bigger/better flash for the camera..the pics seem too dark. Or just photoshop them brighter

...

...

...

white to turbo compresser. black to wastegate. remove the stock vac lines that go from compressror to wastegate

I guess I can help you answer some of these questions.

The gauge is entirely manual, no electronics whatsoever.



Like scott said, goes to the compressor and wastegate. There is a line on there right now bypassing it. Just remove that one and run it to there. There are holes int he firewall already for it up near the steering column.