Well, I plan on getting the engine in the car this weekend, but there's still a bunch left to do... since I usually end up forgetting everythign when it comes time to do it, I've made a todo list:

TODO



This is the first time I've rebuilt an engine so any corrections or pointers on what I should do before starting .. any prep work or priming that should be done etc, I've put some things which I think I should do in my todo list but please any input will be appreciated, I know some of you have done this a number of times and will know what to look out for.



thanks.

Your list sounds good. I wasn't able to get mine to fire up the first time with the starter motor, so I had to push it. Just letting you know so if it doesn't start, it will :bigthumg:

i put a reman in my friends 90 GXL. it was locked for some reason. so i had to push it up and down my hill then it was fine https://www.nopistons.com/forums/pub...DIR#>/wink.png

until it hit a tree at the bottom of that hill https://www.nopistons.com/forums/pub...DIR#>/wink.png

I've read on some piston motor buildup sites that people have primed their oil system before first start, seemed like a good idea but I don't have an electric oil pump... anyone have any ideas on how to do this on a 13B w/stock oil pump? https://www.nopistons.com/forums/pub...DIR#>/wink.png

there are 2 ways to do it

1. spin the oil pump with the front cover off

2. crank the engine over with no spark plugs, and no fuel until you see pressure



mike