NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Suspension Diagrams?????? (https://www.nopistons.com/2nd-generation-specific-17/suspension-diagrams-2358/)

alton316 05-01-2002 08:00 PM

The FSM dosen't Show you how to align the front end.

My 87 na pulls to the right real bad, (dont even think of

letting go of the steering wheel). Any info on what to do

with this problem?

13BAce 05-01-2002 08:35 PM


Originally Posted by alton316' date='May 01 2002,22:00
The FSM dosen't Show you how to align the front end.

My 87 na pulls to the right real bad, (dont even think of

letting go of the steering wheel). Any info on what to do

with this problem?

That could be as simple as an alignment problem, or maybe something loose in the front end.

Powerpack 05-01-2002 08:44 PM


Originally Posted by alton316' date='May 01 2002,19:00
The FSM dosen't Show you how to align the front end.

My 87 na pulls to the right real bad, (dont even think of

letting go of the steering wheel). Any info on what to do

with this problem?

You could just jack the front of the car up and check for any loose or worn parts, like tie-rod joints or suspension joints. Pry up and down using a pry bar to check for worn joints.

If it looks ok, why don't you go for an complete alignment? :smilewinkgrin:

alton316 05-01-2002 09:27 PM

What happen in the first place that caused this is,

My wife spun out in gravel lost control, and nailed a curb.

pretty good, it bent the front right wheel, pretty good,

and it even bent the inside edge of the rear left wheel.

Rob x-7 05-02-2002 02:57 PM

A alighnment shop will charge you about $40-50 for a front alighnment, like 80-100 for all 4 wheels, just bring it to a pro for this, I personally dont reccomend people do thier own alighnments.

13BAce 05-02-2002 03:28 PM


Originally Posted by Rob x-7' date='May 02 2002,16:57
A alighnment shop will charge you about $40-50 for a front alighnment, like 80-100 for all 4 wheels, just bring it to a pro for this, I personally dont reccomend people do thier own alighnments.

I did my own, and it was really good, but ever since I used my steering rack as an engine stand it has been off. :satisfied:

Powerpack 05-02-2002 11:06 PM


Originally Posted by 13BAce' date='May 02 2002,14:28
I did my own, and it was really good, but ever since I used my steering rack as an engine stand it has been off. :satisfied:

Doing it yourself is not a problem, the hard part is to have the equipment to do it right, unless you can do it yourself in a shop or buy the equipment to do it, but I don't know anyboby who has the money to buy such equipment and accuracy is needed if you don't want to cause premature tire wear.

alton316 05-02-2002 11:33 PM

allready have premature tire wear both front tires wear

on the inside edge.

ILUVMY88CABRIO 05-03-2002 02:21 AM

http://beyondtheredline.fd3s.net/2nd_DTSS.jpg

Is this what you're looking for? Sorry no pic of the front.

Rob x-7 05-03-2002 04:09 PM


I did my own, and it was really good, but ever since I used my steering rack as an engine stand it has been off
< Keep in mind that 13b ace is pretty much a genius and not just around cars. He is like McGyver, his toolbox for the car has a rubber band, a paper clip, and a adjustable wrench<---- thats all he needs


All times are GMT -5. The time now is 10:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands