I am gearing up for a suspension job. I have new struts and new springs already, so now all i need to buy is a bushing kit, and the DTSS elim bushings. My question's are:
1) The total hyperflex kit by ES. Does that have every bushing I will need? Or are there additional ones that are not included with the kit, which I will need to buy? 2) I will only have 2 days for the job...can this be done with out a press? I only have hand tools, but I may have access to air tools. 3) My buddy told me that a propane torch will not burn hot enough to melt the old rubber bushings. Is this true? If so, how should I burn them off? Any other advise? |
man, thanks for bringing this up. I will eventually have the same set of questions. I'm looking forward to the answers....anyone?
|
heres a question
what does it feel like when ur in need new bushings?/??? |
you need a press, some of them are a bitch to get off
mike |
i replaced all the rubber bushings in my fiero with poly ones using nothing more than a propane torch to burn them out.
http://pengaru.com/~swivel/cars/fier...1-2001/015.jpg all the red stuff. man that was messy to do, it stinks like hell and pops rubber **** all over the place. People have told me you can just heat them and they should pop out, mine didnt, but they burned for a while til there was nothing left and stunk up the whole neighborhood. |
Originally Posted by j9fd3s' date='Apr 1 2003, 11:02 PM
you need a press, some of them are a bitch to get off
mike |
Originally Posted by pengaru' date='Apr 1 2003, 03:04 PM
[quote name='j9fd3s' date='Apr 1 2003, 11:02 PM'] you need a press, some of them are a bitch to get off
mike the dtss you might be able to do witout a press, but its the front lower control arm rear bushings that are the bitch, skip the bushings and go for the mazdacomp bearing kit mike |
|
Originally Posted by sunshine' date='Apr 1 2003, 04:49 PM
I am gearing up for a suspension job. I have new struts and new springs already, so now all i need to buy is a bushing kit, and the DTSS elim bushings. My question's are:
1) The total hyperflex kit by ES. Does that have every bushing I will need? Or are there additional ones that are not included with the kit, which I will need to buy? 2) I will only have 2 days for the job...can this be done with out a press? I only have hand tools, but I may have access to air tools. 3) My buddy told me that a propane torch will not burn hot enough to melt the old rubber bushings. Is this true? If so, how should I burn them off? Any other advise? |
mazdacomp bearing kit?
elborate? i have never heard of hta tbefore. |
All times are GMT -5. The time now is 08:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands