NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Stock Fan Clutch (https://www.nopistons.com/2nd-generation-specific-17/stock-fan-clutch-34648/)

FCmaniac 02-28-2004 08:36 AM

I dug out the stock fan and shroud yesterday. I'm going to put them back in instead of the efan thats in there now. The stock fan has been sitting for a few years. How do I know if the clutch is good in it? When I spun it by hand, I felt resistance like every half turn. Is this normal?

John415 02-28-2004 09:38 AM

That's about normal, you have to remember about those fans, that they spin at thousaunds of times a mintue not just a spin by hand. My friend's when we changed to his old stock one, you could barely turn it by hand but thte motor had no trouble and the clutch is fine. If it acts up just give it a little WD40 in the clutch.

'79rx7 02-28-2004 05:08 PM

the only way to test it is to put it on the car bring it up to operating temperature, then use something old and soft like a shoe or something to touch it to see if it stops, you could use you hand but i wouldn't...

teknics 02-28-2004 06:06 PM

or just let it be cold see if there's any resistance, which there shouldnt be, then leave it under a hot lamp for a while, try to spin it there should be resistance.



kevin.

rotary speedster 02-28-2004 06:34 PM

I stopped mine with my hand and spun it the other way while running. I guess its shot!

'79rx7 02-28-2004 10:43 PM

you should be able to stop it then when you let go it will slowly speed back up...

FCmaniac 02-29-2004 09:12 AM

thanks

teknics 02-29-2004 01:05 PM


Originally Posted by rotary speedster' date='Feb 28 2004, 07:34 PM
I stopped mine with my hand and spun it the other way while running. I guess its shot!

it depends, was the engine cold when you did it?



kevin.


All times are GMT -5. The time now is 07:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands