2nd Generation Specific 1986-1992 Discussion

Turbo Downpipe

Old 10-27-2003, 09:11 PM
  #1  
dac
Senior Member
Thread Starter
 
dac's Avatar
 
Join Date: Oct 2001
Location: Portland, OR
Posts: 790
Default

Looking for a CHEAP S4 Turbo downpipe. Have my eye on Corksport, but rx-7store.net has a Racing Beat one for $90



Also since I'll now be running a Turbo, can I run it without a muffler? Okay don't laugh.... I know Rotaries are LOUD... and I know a Turbo will quiet it quite a bit, but would it be streetable (I ran my Supra with just a dump tube and loved it).



Project Zuki is getting a Turbo transplant... Looking for a cool hood scoop if anyone has any ideas? (Thought about a WRX STi type)



Thanks guys!
dac is offline  
Old 10-27-2003, 11:00 PM
  #2  
Senior Member
 
DJ Blu's Avatar
 
Join Date: Apr 2003
Location: Long Island, NY
Posts: 442
Default

the problem with changing the exhaust on a turbo is not a question of being "streatable". you need to worry about over boosting. turbos work off of exhaust back pressure. the faster ur exhaust is flowing, (ie. downpipe, or no muffliers) the faster ur turbo will spool, creating more boost. if your engine runs lean, you will blow your engine. take great precaution when modifying the exhaust of your rex, if its turbo.
DJ Blu is offline  
Old 10-28-2003, 12:05 AM
  #3  
Super Moderator
 
vosko's Avatar
 
Join Date: Jul 2001
Location: NJ
Posts: 17,839
Default

i love my RB 3" dp its awesome. you are gonna have to make it custom anyway



if you put a mid muffler and a rear muffler it should be acceptable as far as loudness
vosko is offline  
Old 10-28-2003, 07:22 AM
  #4  
Super Moderator
 
1988RedT2's Avatar
 
Join Date: Apr 2002
Location: VA
Posts: 2,532
Default

Originally Posted by dac' date='Oct 28 2003, 03:11 AM
Also since I'll now be running a Turbo, can I run it without a muffler?
Once, while I was putting my exhaust together, I ran the car with just the downpipe, hi-flow cat, and a 45 degree turndown. I drove it a few miles just for the hell of it. Let me tell you, it was loud. Not too bad at idle and cruise, but when I got on it, she roared. If I had passed a lawman, he would have bagged me for sure, and I live down here in the Land of Loud Cars. At the very least, you'll have to run one muffler, and that's if you can stand a little cabin noise.
1988RedT2 is offline  
Old 10-28-2003, 12:11 PM
  #5  
Senior Member
 
dumarjo's Avatar
 
Join Date: Jun 2002
Posts: 140
Default

i'm not shur about the more boost thing.. I agree with the fast spool thing. I not shur about the high boos is why ? If the wastgate is in good chape is not suppos to get more than 5.5 psi, no ?? could you elaborate more on this ?



thanx



chicoutimi
dumarjo is offline  
Old 10-28-2003, 12:20 PM
  #6  
Senior Member
 
Midnightdriver's Avatar
 
Join Date: Aug 2002
Location: Reno,NV
Posts: 1,081
Default

its a boost spike the boost will come on faster than the wastegate can react to it.. this can cause your engine to lean out..I saw this when my subie was turbo and I ran a cat...when I removed it I would spike at 7psi instead of only going up to 5psi...and that was under hard accel.
Midnightdriver is offline  
Old 10-28-2003, 12:24 PM
  #7  
Super Moderator
 
1988RedT2's Avatar
 
Join Date: Apr 2002
Location: VA
Posts: 2,532
Default

Originally Posted by dumarjo' date='Oct 28 2003, 06:11 PM
i'm not shur about the more boost thing.. I agree with the fast spool thing. I not shur about the high boos is why ? If the wastgate is in good chape is not suppos to get more than 5.5 psi, no ?? could you elaborate more on this ?



thanx



chicoutimi
Yes. Less restriction in the exhaust will enable the turbo to push higher boost pressures. The stock wastegate, particularly on S4 TII's, can be overwhelmed by the extra flow. It's called boost creep, and it can kill your engine! You should definitely do your homework before you begin modding, especially with a turbo car.
1988RedT2 is offline  
Old 10-28-2003, 01:10 PM
  #8  
Senior Member
 
RX7Aggie's Avatar
 
Join Date: Apr 2002
Location: NASA/JSC - Clear Lake, TX
Posts: 870
Default

i'll sell you my old S4 down pipe.



it's only 2 1/2" ID, but i'll give it to you for cheap, say $35 shipped?
RX7Aggie is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fasedown911
RX-7 & RX-8 Parts For Sale & Wanted
7
02-25-2008 06:14 PM
jefraney
RX-7 & RX-8 Parts For Sale & Wanted
2
09-27-2006 08:11 PM
vspecpgt
RX-7 & RX-8 Parts For Sale & Wanted
1
12-31-2003 07:36 AM
turborotor
2nd Generation Specific
9
08-07-2002 07:30 PM
bhdixon
3rd Generation Specific
7
02-19-2002 01:00 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: Turbo Downpipe



All times are GMT -5. The time now is 08:52 PM.