I spent about 3 minutes on this with a polisher my buddy brought over the other day, thought I would give you guys a sneak peek

finish them up!

https://www.nopistons.com/forums/pub...IR#>/bling.gif



Those are going to look good on my car https://www.nopistons.com/forums/pub...#>/biggrin.png

Nice.



What am I looking at?



Redwood

"I don't do turbo"

and mine too.



kevin.

you dont do fuel?













its going on mine too

how much? how big? what injectors do they support? etc..

how "big"?







theyre aluminum so theyll fit anything im assuming

Well, now that you mention it, I don't do anything except stock fuel https://www.nopistons.com/forums/pub...DIR#>/wink.png



Thanks.



Redwood

I am in the middle of designing these for the FC guys, this is a preliminary photo of the primary rail, i cut one to do some fitting and decided to see what it would look like polished, I am going to be making these for a variety of configurations so stay tuned, basically you will be able to pick these up to use with 1608 cc injectors without having to do the injector modification, for a lot less than anyone else out there, I am also trying to make them for you guys trying to keep the stock fuel lines.

correction.



1680cc injectors.



who needs them puny 1600cc shits, wes gots dem 1680's, its da ways to flow my nizzles.



kevin.

are you going to put that medallion on your front bumper?

Its not a medalion, its acctually a military squadron coin. I used it because it was in my pocket, showed the colors well, and the gold/chrome contrast made everything stand out the way I wanted it to.



The military coin has quite a heritage if you did not know, really do not want to be caught without one...



So it may not be on my bumper, but I should have it on me, or another at anytime you see me.

Correction injector design style not flow rate =P....

it looks like one of those grill medallions old people from

Florida have on the front of thier Town Cars

Nope, just a coin

http://www.emilitarycoins.com/history6.htm



there is why I carry a coin....

they look really nice, and once you get them done im sure i will be looking your way for them. How about making some setup for AN fittings also?

hes gonna be making the setup for either AN or stock style.... you can pick https://www.nopistons.com/forums/pub...#>/biggrin.png

Camel if I had a pic of my coin I would check you with it. Anyways nice rail. Can you make a pre-assembled kit out of it? You know include ss braided lines, injectors, gromets and o-rings, and of course the rail. I think this would be easier for the buyer and more profitable for you.

I doubt it would be more profitable, just consider how hard it is for anyone to make a product and sell it to the T2 guys. If its even moderately priced, its too expensive, and if its dirt cheap, people will be interested until the point where they have to come up off that green. I say keep it as simple and cheap as possible and let people option out their own system as their budget allows.

thats actually what me and camel have been talking about, and posting about for a couple weeks now.



im one of the guinea pigs, woohoo.



kevin.

Like I said this is a sneak peek, when the kits are ready I will post up what I have and what the quanities are for the styles I am making, right now I am still doing a lot of R&D to make sure you guys get a quality product, and that everyone is happy with prices and design.

hey thanks for the breif hisory on the coin very cool. did yours have an interesting detail behind it .And that rail is tight looking ,do you run that through a flow bench or anything to get it right.thanks Corbit