cool, i moved all the suff out of the way when i did mine, it looks a lot better



mike

Here is the "bare harness" at the injector end. The new plan is to re-route this whole harness to the rear of the engine. The AFM is also being relocated to the TB inlet. This removes ALL of the harness from the turbo area!!!!!!!

Thats quite a project you have there.Thankfully the rats nests on FB is easier to pull. https://www.nopistons.com/forums/pub...DIR#>/wink.png I already modified the harness and rewrapped it in tape.

if you need any connectors lemme know, some of them are available new



mike

thanks

where can you get new connectors? i have no idea where you get them

I use weatherpak or metricpak connectors. The Injector connectors are available at Autozone if you just want to do a crimp install

mazda lists a bunch in the 97 bulletin book, but they didnt tell anyone. i have the book, and have ordered a bunch of the connectors so i kinda know whats what, the pictures are really bad



mike

Mike, I need:

Water Temp Switch

Water Temp Gaguge Unit

Knock Sensor

o2 Sensor

AFM



I also need 20 pins for the ECU connections



Are the connectors "bare" or do they come terminated with a length of wire attached?

I would prefer bare with the terminals supplied of course John

they come bare with the pins. all this stuff is 87-88 right? cause 89 is different



mike