I need to replace my motor and tranny mounts, and was going to use the competition ones from mazda motorsports (plus they're the least expensive, non-solid mount). On their site, the description says this for the tranny mounts: Should I bother with the bushing/crossmember, or are the square mounts mentioned typically the parts that need replacing?

it depends on how old the one you have now is and if its been covered in oil/dirt, etc. Just look under there and youll see it. its right on the bottom middle of the crossmember, easier to see than the square ones.

Ok, I'll check it out. I've already ordered the motor mounts and the 2 square tranny mounts, when I take it all apart I'll inspect it.

when i did mine they all fell into a bunch of different pieces

replace the bushing on the centere of the cross member. Mazda will tell you you cant and that it is one peice. They are wrong. You can buy that one bushing seperately I don't remember the part number

does anybody know the part number, my crossmember bushing is worn also, and there asking a rediculous price for the entire crossmember. Help is appreciated.

[quote name='rx7man629' date='Jul 27 2005, 10:14 PM']does anybody know the part number, my crossmember bushing is worn also, and there asking a rediculous price for the entire crossmember. Help is appreciated.


[/quote]



The parts fische pdf files are at mazdaspeedmotorsports.com as well as mazdaformance.com

Almost every tranny crossmember I have worked with has a dinked centre bushing. They seem to really take the weather hard.

[quote name='Cheers!' date='Jul 27 2005, 07:26 PM']replace the bushing on the centere of the cross member. Mazda will tell you you cant and that it is one peice. They are wrong. You can buy that one bushing seperately I don't remember the part number


[/quote]

Is this it here, labelled 39-364? Is that the part number?

yes but that's the D-code not the parts number...