NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Rebuilding my own engine...should I? (https://www.nopistons.com/2nd-generation-specific-17/rebuilding-my-own-engine-should-i-4062/)

UniqueTII 07-26-2002 02:25 PM

How hard is it to crack open an engine and replace all of the seals? I'd like to try my hand at a rebuild, but since the engine runs great now, I'd hate to screw up a rebuild and have to buy another one. Also, how hard is it to do a mild port job? I know templates are available, but should I leave the porting to the pros? Obviously, I'm not looking for 400+ hp, just a little more airflow.

vosko 07-26-2002 02:48 PM

i tore down my TII engine in about 5 hours. i would let somebody port the housings just so you don't risk damaging a good housing. its not that hard but it does take alot of time to rebuild. i would probably wait till winter to tear it down https://www.nopistons.com/forums/pub...IR#>/smile.png

UniqueTII 07-26-2002 03:02 PM

That's what I was thinking. How much would a port job cost if I sent the housings out, assuming they're in good enough condition?

vosko 07-26-2002 03:18 PM

usually $300. how far away is pineapple from you ?

ChainSawOnSteroids 07-26-2002 03:19 PM

ATKINS rotary told me $150 for a street port,,,and $300 for a bridge

UniqueTII 07-26-2002 03:28 PM

All I'd want is a street port...I don't want to have to use different apex seals...well, maybe I should upgrade them.



Where is pineapple?

89 Rag 07-26-2002 03:31 PM


Originally Posted by UniqueTII' date='Jul 26 2002, 02:28 PM
All I'd want is a street port...I don't want to have to use different apex seals...well, maybe I should upgrade them.



Where is pineapple?

Pineapple racing is located in Portland, and Hawaii.

raised-na-rx 07-26-2002 03:31 PM

pineapple is in Portland, OR ^_^

UniqueTII 07-26-2002 03:34 PM

Hmmm...that's really far from here.

vosko 07-26-2002 03:42 PM

i have no clue. he is in iowa. i'm on the right coast LOL . best bet is probably pay to ship them to him. shipping shouldn't be too bad ground like $40

Rotarydragon 07-26-2002 04:33 PM

Don't worry UniqueTII I'll rebuild your engine reaaaallll good.



https://www.nopistons.com/forums/pub...#>/biggrin.png

horn4858 07-26-2002 06:55 PM

we ported our own street port and runs good. you need templates for bridgeport so you can get them the same.

banzaitoyota 07-26-2002 07:00 PM

Rob ROCKS!!!!! He built my NA motor https://www.nopistons.com/forums/pub...DIR#>/spam.gif

vosko 07-26-2002 07:09 PM

if i didn't have an excellent engine rebuilder 10miles from my house. i'd go with pineapple https://www.nopistons.com/forums/pub...IR#>/smile.png

Rotarydragon 07-26-2002 07:46 PM

Are you saying I'm not excellent!?



FINE! I see how you ARE!

UniqueTII 07-29-2002 11:04 AM

You're not 10 miles from my house.

Rotarydragon 07-30-2002 07:20 AM

No but I'm 30 or feet so closer then I was.

UniqueTII 07-30-2002 08:38 AM

Yeah, I moved a wee bit to the south...I don't think it was worth it. I got an hour and a half of sleep last night, but I wrote a 4 page paper and my living room looks great!


All times are GMT -5. The time now is 07:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands