NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Rear Camber Adjustment (https://www.nopistons.com/2nd-generation-specific-17/rear-camber-adjustment-44749/)

porsche4786 02-13-2005 02:38 PM

Anybody know who has a reasonable price on a rear camber bar? and that is on the west coast with quick shipping? I installed ground control coilovers and now the rear camber is pretty bad. if there is any other way to fix this, please let me know. and i'm guessing that les schwab doesn't have a way of fixing this when aligning...

Cheers! 02-13-2005 03:07 PM

mazdatrix.

else you can make your own. I made my own and it worked out to 60 cdn including the left hand tap which was 20 bucks

porsche4786 02-13-2005 03:10 PM

I actually don't even know where the hell this peice is that I need to replace or whatever. Or how to install it.






Originally Posted by Cheers!' date='Feb 13 2005, 01:07 PM
mazdatrix.

else you can make your own. I made my own and it worked out to 60 cdn including the left hand tap which was 20 bucks



Cheers! 02-13-2005 04:59 PM

check the FSM

porsche4786 02-13-2005 05:15 PM


Originally Posted by Cheers!' date='Feb 13 2005, 02:59 PM
check the FSM






I'm not sure what to look for in there...I mean, there is no rear camber adjuster on the car, so where would it go? What would i be replacing?

j9fd3s 02-13-2005 05:52 PM


Originally Posted by porsche4786' date='Feb 13 2005, 03:14 PM
I'm not sure what to look for in there...I mean, there is no rear camber adjuster on the car, so where would it go? What would i be replacing?




theres a link from the rear subframe to the body, this is what you're changing

porsche4786 02-13-2005 06:07 PM


Originally Posted by j9fd3s' date='Feb 13 2005, 03:52 PM
theres a link from the rear subframe to the body, this is what you're changing




http://mazdatrix.com/h6_86-92.htm

which of these do I need, or should i get then? I'm kinda of confused, with one of these you only need 1 it says, but with the other you need 2, one for each side.

j9fd3s 02-13-2005 06:21 PM


Originally Posted by porsche4786' date='Feb 13 2005, 04:07 PM
http://mazdatrix.com/h6_86-92.htm

which of these do I need, or should i get then? I'm kinda of confused, with one of these you only need 1 it says, but with the other you need 2, one for each side.




the red one replaces the factory rod, and you just need the one.



the things below it, mount in a different place, and thus you need two, but if you have the red one, you dont need these. its an either or

porsche4786 02-13-2005 06:35 PM


Originally Posted by j9fd3s' date='Feb 13 2005, 04:21 PM
the red one replaces the factory rod, and you just need the one.



the things below it, mount in a different place, and thus you need two, but if you have the red one, you dont need these. its an either or




ok, thanks. i think i'll probably go with the single red one, just sounds easier to install and fixes both sides at the same time. but I hope it will fix the camber.

89 Rag 02-13-2005 06:52 PM


Originally Posted by porsche4786' date='Feb 13 2005, 04:35 PM
ok, thanks. i think i'll probably go with the single red one, just sounds easier to install and fixes both sides at the same time. but I hope it will fix the camber.




How much is too much? .25-.50 or more than that?


All times are GMT -5. The time now is 02:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands