NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Problem with wiper switch (https://www.nopistons.com/2nd-generation-specific-17/problem-wiper-switch-76089/)

jrwaters1 01-24-2012 09:10 PM

Problem with wiper switch
 
My 91 Convertible wiper switch only works on one speed, the wipers never stop at the bottom of the windshield. Does anyone know anyone that can rebuild this. Any help would be greatly appreciated.
Jack
Eastern NC

RicerJ 01-25-2012 01:00 AM

Re: Problem with wiper switch
 
wiper switches are very common thing that go out on the cars its the relay that needs to be replaced that would fix your problem i dont know the number for the relay or where you can find it but they cost about 10 bucks for it the relay is in the switch itself

Baldy 01-25-2012 08:00 AM

Re: Problem with wiper switch
 
Here's a link I found that explains the repair you need: link

jrwaters1 01-25-2012 02:07 PM

Re: Problem with wiper switch
 

Originally Posted by Baldy (Post 851574)
Here's a link I found that explains the repair you need: link

Thanks so much. This will be a big help.
Jack

mazdaspeed7 01-25-2012 02:44 PM

Re: Problem with wiper switch
 
I have done that with great success before. Its not difficult if you know your way around a soldering iron

Phoenix 01-25-2012 05:11 PM

Re: Problem with wiper switch
 
just curious, is this the same procedure for a convertible?

jrwaters1 01-25-2012 05:53 PM

Re: Problem with wiper switch
 
The difference is that the cruse main switch is located in the top part of the module that contains the hazard Switch and the wiper switch
Jack

phinsup 01-25-2012 09:28 PM

Re: Problem with wiper switch
 
I always buy the relays from digikey.

jrwaters1 01-26-2012 09:34 AM

Re: Problem with wiper switch
 
Thanks, I ordered one from them yesterday.

Jack

jrwaters1 02-02-2012 04:30 PM

Re: Problem with wiper switch
 
:friday:
Repaired the Switch yesterday and got every thing back together today and now everything works. Thanks for all the input. It sure helped.

Jack


All times are GMT -5. The time now is 10:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands