How hard is it to remove the primary injectors? Do i have to take off the whole throttle body and intake manifold or just the intake manifold?

You need to pull the upper intake with throttle body. I'ts not that hard just take your time.

Dave

Thanks man, do you know where i can find a new connecter for my secondary injectors? I accedently broke one off when i was disconnecting it.

no can't help you there. None of my business but why are you pulling your injectors

Dave

My car has been sitting for 6 years. I'm about 99.5% sure the primary injectors are clogged. Fuel is getting to the block, engine started on starting fuel but didn't stay running.

Been there good luck. Don't use starting fluid it dries out the seals. If your not getting an injector pulse

post and i'll try to help.

Dave

Ok man, i'm going to send them off to RC engineering to get them cleaned and then i'll see what happens. I'll keep ya informed. Thanks alot,



Chris

if its an 84-88 you can get the injector connectors at any big auto parts store, pepboys sells em here

if its an 89+ mazda sell's em new, pm me if you need the number



mike

There isn't a pepboys in Quincy but there is an Autozone, Advanced Autoparts and O'reillys. i'll check there today after school today because my track meet got postponed till tomorrow. thanks man!!