ok so in a week i can finally weld/assemble the exhaust for the T2. ordered RB 3.15" DP and two flanges and two gaskets. this will actually work unlike the POS thunder fab dp/mp i cut up. i just want the car off jackstands and driveable. that would make me very happy!

two money pits is better than one! https://www.nopistons.com/forums/pub...IR#>/smile.png



sounds like your TII is progressing quickly.

well i got it started but i can't continue until i have an exhaust on the car. it is too loud with no muffler for the neighbors!

Cool.That downpipe will help it spool alot faster.Hows the FD?Is it getting fixed right now vosko?

Vos,



Why didnt' you get the whole racing beat tubo back? i want one... i saw in the evil forum you had a very attractive price. If i drive down can i get it for that price?

cool, thats basically what we did for the black car. we used the rb center muffler too

Wanna buy my n1 duals? https://www.nopistons.com/forums/pub...IR#>/smile.png



You destroyed the thunder fab dp already?

it just went to the body shop today. i need a muffler its too ******* loud to let it even idle in the driveway right now

i'm confused https://www.nopistons.com/forums/pub...1047683561.gif



judge ito was gonna get me one for $700 but i only paid $1k for the car.... $200 is cheaper https://www.nopistons.com/forums/pub...DIR#>/wink.png

i don't want N1 duals.......... too expensive lol



yeah POS thunderfab is all cut up. it deserves to be HUNK OF ****!

whats so bad about the thunderfab unit



its fine for me so far?

What are you getting instead? The corksport?

vosko, since you're in a welding mood....... wanna weld some flanges on my flange less borla midpipe?



i got it as a trade cuz someone wanted my 1 remaining 93 spec turns.... and didnt wanna dish out money, so i took his 3.5" midpipe with no flanges https://www.nopistons.com/forums/pub...IR#>/smile.png

it has two 45 deg bends which hinders flow and it hugs and rubs the trans tunnel! ITS CRAP!

i have a 3.5" custom exhaust with a dynomax muffler. i'm trying to decide if i'm gonna reuse the 3.5" hooker super flo muffler or not. its gonna flow alot and it will be loud but it will cost me $200 total so its all good https://www.nopistons.com/forums/pub...#>/biggrin.png

if we/i get good at welding sure why not

sounds good..... but you're more than welcome to practice on it........ dont gotta look pretty for me.. hehe

hmmm I thought my thunderfabrications dp/mp was great. :shrug:

i'm confused https://www.nopistons.com/forums/pub...1047683561.gif



judge ito was gonna get me one for $700 but i only paid $1k for the car.... $200 is cheaper https://www.nopistons.com/forums/pub...DIR#>/wink.png [/quote]

can i get hooked up with a RB turbo back for 700?

you haven't used a RB downpipe yet then https://www.nopistons.com/forums/pub...IR#>/smile.png

i'm confused https://www.nopistons.com/forums/pub...1047683561.gif



judge ito was gonna get me one for $700 but i only paid $1k for the car.... $200 is cheaper https://www.nopistons.com/forums/pub...DIR#>/wink.png [/quote]

can i get hooked up with a RB turbo back for 700? [/quote]

shipping is gonna kill you. i think that is the "vosko spent $20,000 here special price" though https://www.nopistons.com/forums/pub...#>/biggrin.png

20K? woah



https://www.nopistons.com/forums/pub...1047683894.gif

No, but I've helped install one RB turboback system and ridden in two turbo II's with the RB turboback. The butt-o-meter didn't distinguish a difference between that and my thunderfab into single n1 turbo back. Maybe the dyno would be a different story.



The RB DP is a sweet piece, but then you either have to use the presilencer or get a custom MP done to bolt up to the stock catback. In hindsight getting the 3'' RB DP and going custom from there back might have been better.

i'm comparing design and fit and finish. i will take pix once its all done https://www.nopistons.com/forums/pub...IR#>/smile.png



now you have seen the light https://www.nopistons.com/forums/pub...IR#>/smile.png

my stuff will be here thursday. i love RB https://www.nopistons.com/forums/pub...IR#>/smile.png

me three.



kevin.

they have an open house after sevenstock, its a lot of fun



mike

NOthing beats racing beat.



Even the racing beat strut tower bar (made from Al) is money! both in blingnes, design and coolness.



I couldn't believe how light that thing was.

every racing beat product i have used has been very good