NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Omfg! (https://www.nopistons.com/2nd-generation-specific-17/omfg-38680/)

Super_Dude 05-11-2004 03:25 AM

Hi sorry bout the title but I wanted a quick answer

My car (87 NA) is doing the wierest thing with the clutch

when I first press the pedal it is fine but every other press after that it gets weaker and weaker and eventually it just stays on the floor and the clutch is kind engaged (first gear rolls forward alittle with the clutch in.) After I turn the car off for awhile it it ok for 1 shift then it gets worse and worse. I checked the clutch fluid and it was low so i toped it off but it is alittle over full.

Thnx

TheCamel 05-11-2004 07:03 AM

Yor internal seals are worn out on your clutch master cyl, or your clutch slave cylinder, look for fluid residue around either one, that will be your culprit.

Jims5543 05-11-2004 08:41 AM

I concur!!



Replace both of them at the same time. Or replace one now and the other is a few weeks. I prefer to do them both at once and be done with it.

j9fd3s 05-11-2004 10:49 AM

i also concur! clutch hydros!

Super_Dude 05-12-2004 01:16 AM

How much is that gonna cost me?

j9fd3s 05-12-2004 10:49 AM


Originally Posted by Super_Dude' date='May 11 2004, 10:16 PM
How much is that gonna cost me?

how much you got? the plantation kit (master and slave get it! haha!) is usually around $100-150

FlukeSDS 05-12-2004 11:27 AM


Originally Posted by j9fd3s' date='May 12 2004, 07:49 AM
the plantation kit (master and slave get it! haha!)

LMAO that was evil

Jims5543 05-12-2004 01:50 PM


Originally Posted by j9fd3s' date='May 12 2004, 10:49 AM
how much you got? the plantation kit (master and slave get it! haha!) is usually around $100-150

https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif



Good one.....

1Revvin7 05-12-2004 01:51 PM

haha

Turbo II 05-12-2004 01:53 PM

sounds correct to me. or u can just keep pumping it right now and let the pressure build up if u dont see any fuild around the master and slave. might be worth a shot. maybe u were just low on fluid


All times are GMT -5. The time now is 03:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands