Does any body know what size bolts I'll need to plug the holes for the oil injectors? Also how long should they be? Sorry for asking but the fc3spro site is not working. Thanks.

i think its 8x1.25 but lets wait for pengaru, he's actually done it



mike

One other thing. Does anybody have the instructions for the greddy type24v(2 row v-spl core intercooler for the 89-91 rx7) intercooler install in english?

ha! just look at the pics, and http://www.2751engineering.com/cymfc3s_turbo.html



mike

i did do it but i don't remember the specs for the bolts, sorry guys https://www.nopistons.com/forums/pub...IR#>/smile.png

well take one of the nozzles to the hardware store, its not hard to figure out



mike

M8-1.25 sounds right. It's a fairly common bolt at a decent hardware store. This is the fine thread, so they won't all have it. The shortest bolt I could find was still too long, kind of looks stupid sticking out.

I'll go out and measure one.



Their are instructions for the GReddy FMIC? I just figured it out on my own. lol.

I measured it as being 10mm (.388") x 1.25mm (.047"). It was kinda hard to tell if the thread pitch was 1 mm, or 1.25 mm, so you might want to bring the bolt with you. I just used calipers to measure it, somewhere I have a metric thread gauge, but can't find it.

Thanks guys I appreciate all the help. I think I'm going to just go buy both bolt sizes and see which one fits better just to be safe. Thanks for the link about the intercooler also.