what to do if the lights in the bottom half of my logicon go out. well they did go out. so what to do since they went out.

if you take the unit one there are 2 bulbs on the bottom



mike

how do i get it out. just to be sure i dont break anything

you need to take the shaifter plate off and then the radio surround. then it comes out with 4 screws. there are 3 wiring harness connectors on it. 2 of them are right behind the logicon, but one is behind the warning light cluster. you shoul be able to pull it out enough to change the bulbe without taking the thing all the way out of the car



mike

woo. That's what is wrong with mine too. Guess i'll be gank'n mine out this week!

thanks man. ill get that

man this is the hardest thing ive ever done. i had to take out about 10 screws

***** https://www.nopistons.com/forums/pub...DIR#>/moon.gif

i am not kidding. i had to take out the stereo and everything. then you have to take the logicon apart while it is still in the hole bc the one wire wont come off of it. it was tough.