2nd Generation Specific 1986-1992 Discussion

Just received 87' GX doesn't run

Thread Tools
 
Search this Thread
 
Old 11-11-2007, 05:03 PM
  #1  
Member
Thread Starter
 
Electric's Avatar
 
Join Date: Aug 2007
Location: Alliston, Ontario
Posts: 47
Default

Now, I just got this car friday. Basically its an 87' s4 N/A with like 278000 kms on it but the motor was swapped out for a lower milage one...I have no idea. Now, the people who did this were the absolute dumbest mother ******* ever and didn't connect a shitload of wires. There is a 6 hole white connector on each side, a 3 hole green one on each side I was wondering what those do and theres the 6 green which is the diagnostic port. Now, theres also a plate that looks like it bolts to the motor on the right side...I think it might be a ground plate or something..am I right? And will this prevent the car from starting? P.S this car was running with its old motor and the donor car's motor ran strong before it was swapped in so basically I'm 100% sure its a wiring issue because these guys were clearly retarded and left so much stuff disconnected.. Basically my question is what is that plate thing, and what do the white 6 holes and 3 green hole connectors do?



P.S This car has almost no underbody rust except for the control arms and rotors n stuff...only 3 or 4 spots on the hood and 1 on the fender and I got it for 1500 on a trade (deal hasn't finished yet guy is giving me the chance to get the car running first) I'll take pictures tomorrow.
Electric is offline  
Old 11-12-2007, 11:48 AM
  #2  
Senior Member
 
ColinRX7's Avatar
 
Join Date: Oct 2003
Location: Canada
Posts: 3,502
Default

Before you diagnose any wiring problems, do yourself a favour and install new grounds.



Motor to chassis

Battery (-) to chassis



Clean up your ECU mounting on the passenger side floor under the carpet (the ECU grounds off in the body of the ECU to the chassis)



Clean up the coilpack mounting flanges. Scrape off paint or grease or oil, then bolt them back down. The coilpacks ground out by the mounting flanges, which obviously, bolt to the chassis.



Some types of sensors existing on the block ground out directly to the block, which is why you should have a good chassis ground.



After this is out of the way, then you can begin to diagnose any problems (if this didn't solve them already, which chances are, it will).





It's like a 20 year old car now, the grounds are probably shitty.
ColinRX7 is offline  
Old 11-12-2007, 12:32 PM
  #3  
Member
Thread Starter
 
Electric's Avatar
 
Join Date: Aug 2007
Location: Alliston, Ontario
Posts: 47
Default

Alrighty, awesome...I'll do that as soon as it stops raining.
Electric is offline  
Old 11-13-2007, 07:48 AM
  #4  
Super Moderator
 
Baldy's Avatar
 
Join Date: Sep 2002
Location: Tallahassee, FL
Posts: 5,425
Default

Almost all of the electrical connectors are unique. Find a matching plug somewhere in the vicinity, and just plug it in.



Otherwise, post some pics so we know what the heck you're talking about.
Baldy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jakew131
Japan
1
07-18-2006 03:24 PM
Erik
Kills
25
05-14-2004 08:46 AM
1Revvin7
2nd Generation Specific
28
11-20-2003 11:20 AM
broken93rx7tt
3rd Generation Specific
1
05-21-2003 07:50 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Just received 87' GX doesn't run



All times are GMT -5. The time now is 08:23 AM.