NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   just got my turbo 2 (https://www.nopistons.com/2nd-generation-specific-17/just-got-my-turbo-2-a-69171/)

mori9863 02-29-2008 10:26 PM

so i just picked up a 89 turbo 2 with the following done......



-rebuilt engine with under 10k, S5 internals

-Megan coilovers 8/6k

-17x8.5+15 zauber 1-piece/2-piece

-3'' N1 catback, 3'' downpipe and testpipe

-ported wastegate

-Intake, FCD

-320mm dish wheel

-Greddy boost gauge

-new clutch

-FD fuel pump



just wondering what would be a recommended next step performance wise?

any suggestions??

thanks a lot .....

skyhighjared 02-29-2008 11:05 PM

well, other then sway bars and some body skirts...not much

fc3sboy1 03-01-2008 08:32 AM

bigger turbo and frount mount. frount sway bar , injectors, short sifter. geeze its endless on what you can do. it only ends when your happy.

RE_TurboFB 03-03-2008 02:55 AM

Bad ass car!! I bet that thing is fun! https://www.nopistons.com/forums/pub...#>/biggrin.gif

I would get a piggyback fuel computer..maybe a apexI AFC...Then maybe a electronic boost controller...



That way you could run a bit more boost and better tune your A/F ratio for it.. (IMO) It might be the biggest bang for your buck.



After the extra fuel and air going into the engine a injector upgrade will be in order. I think if your pushing the stock turbo to 14 PSI your stock 550cc injectors will be close to 85% duty cycle.



Yeah a front mount would be nice to. you you could get one off ebay for like $150. https://www.nopistons.com/forums/pub...IR#>/smile.gif

mori9863 03-03-2008 04:03 AM

thanks guys....




Originally Posted by RE_TurboFB' post='895730' date='Mar 3 2008, 12:55 AM
Bad ass car!! I bet that thing is fun! https://www.nopistons.com/forums/pub...#>/biggrin.gif

I would get a piggyback fuel computer..maybe a apexI AFC...Then maybe a electronic boost controller...



That way you could run a bit more boost and better tune your A/F ratio for it.. (IMO) It might be the biggest bang for your buck.



After the extra fuel and air going into the engine a injector upgrade will be in order. I think if your pushing the stock turbo to 14 PSI your stock 550cc injectors will be close to 85% duty cycle.



Yeah a front mount would be nice to. you you could get one off ebay for like $150. https://www.nopistons.com/forums/pub...IR#>/smile.gif


Rx2Som 03-09-2008 06:54 AM

Get an ECU.

Microtech or Haltech.

Dont buy any piggy back junk.

If you want a plug in get the haltech.


All times are GMT -5. The time now is 02:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands