Does a S5 TII Intake manifold bolt up to a 86-88 N/A 6Port?

If not what can be done to make it fit?

are you trying to turbo that six port ? not to be a dick but try a search I have seen some detailed posts on how to do this. I don't know the answers and my search skills suck so thats all I have for you.

Dave

im thinking of keeping all the spare parts from my project the greddy FMIC The Microtech and the Stock S5 parts i have and do a turbo 6 port.

Basically, you have to port the lower intake manifold to have holes for the 5th and 6th ports on the 6 port block. Most people use the N/A LIM to Block gasket as a guide. I bought mine premade, so that is about all the detail I know. I do know that there will be some spots on the LIM that will need to be filled with JB Weld or similar material.



There was a thread on the evil forum last week involving this. The most useful post would be http://www.rx7club.com/showpost.php?...38&postcount=7 as it shows the ported manifolds, with filler (the filler is rough in the images, as the pics were taken before it was finished up. It kinda shows whats needed to be done, anyway.)