will bosch 1600cc injectors fit in the stock secondary fuel rail....... a few people said yes, and some said no





so anyone have experience with that?

yes

where online is the best deal on injectors, so far sportcar motion has the best deals i found (cause mike told me about them) anyone know a place cheaper fopr 720's and 1600's?

(720s are $105 A PAIR, 1600S ARE $190 A PAIR_)



kevin.

I have Bosch 1680 injectors and they will fit in the stock fuel rail.... All you need to do is buzz off the plastic on the top (feed side) of the injector with a dremel tool and use the stock O-ring. You can have a custom rail made, but there is no need.... I run 4 x 1680's and I've never had a problem with the tweaking I had to do..



anyway

BTW: the cheapest place I found for Bosch injectors is www.injectors.com



Marren Motorsports



I think 1680's are like 79.00 each or less

site no workie...and im looking for 1600cc

whats the difference when you get that large...1600-1680...samething



tray this: www.injector.com ( with out the (s) )

http://www.injector.com/fuelinjectors.php



Thats Marrens injector page

so would it even matter if theyre 1680 or 1600 .... the 1680s are cheaper here anyways

Yup, and like I said there only 73.00 each.....Beat that price.. And so far I haven't had any problem with the injectors I bought from them either....2 summers running them now I think



Cheap!!!

It won't matter between 1600 and 1680.... They dump alot of fuel..You'll dig'm

wat u powering with them

Wolf EMS stand alone w/ 3 BAR MAP sensor.

what kinda turbo? 1680 all around is kinda large....im gonna be using 550s in primary rail and 1680s in secondary rail for s5 turbo

I have T60-1 .70 comp. - 1.15 A/R turbine Q-trim. @ 18-22psi depending on fuel quality https://www.nopistons.com/forums/pub...IR#>/smile.png Bosch model 44 fuel pumps, Malpassi reg.



I may drop down to 4 x 1200's, but we'll see. I like all the injectors the same CC...Just a preference.



Get the injectors and if you need help buzz'n them down let me know....Its really easy

marren is pretty good. i need to get some 720's for a friend

welp i ordered my 1680s

Aren't how-to's great.

http://home.mn.rr.com/linnihan/1600c..._injectors.htm

LOL!!!! haaaa, I showed Mr. Jim Linnihan how to do his 1680's....He's our RX-7 club Pres. up here in Minne.



See, I wasn't lie'n my idea works https://www.nopistons.com/forums/pub...IR#>/smile.png toooo funny! of course I don't take credit for dream'n this up cuz I know I'm not the first

Nice to see you finally found this place Brad... I thought that was your car wasn't too sure... https://www.nopistons.com/forums/pub...IR#>/bigok.gif Then I remember seeing the DB..

What would be the advantage to getting an aftermarket rail like the K2RD one? Why would they even make one if you can fit 1600cc injectors in the stock rail? https://www.nopistons.com/forums/pub...R#>/unsure.png

Hey Mr. Revin-7,



Sorry to hear about the zap'd motor https://www.nopistons.com/forums/pub...1047683621.gif but ya its a cool site, but you know me......Underground Brad...friend of the community





There isn't any advantage to a K2rd fuel rail, and I'm not saying its bad idea... At first I was going to honed out the stock rail, but I didn't have access to the shop for a week and got pissy so I decided to drag out the dremel tool and went to town.....and lookey, it worked..... https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

hmmmm....so where do i get just the stock orings and seals to use

Wow that is cheap, I should have done it that way.. https://www.nopistons.com/forums/pub...R#>/unsure.png

Too bad we never got another BBQ in for the end of the summer https://www.nopistons.com/forums/pub..._DIR#>/dry.png Oh well, so whens the car get put away?

1Revin 7,



I don't know when Its getting put away...My buddy from PR is coming upi Saturday to finish tuning...Were shotting for 22psi. He's pretty sharp with the ignition timing. After Saturday I'm ripping the motor down to the block and cleaning **** up and re-wiring the ECU so its looks perty....



1680's: after you buzz the 1680's you use the stock O-rings on he feed side...On the pental cap side you use the same O-ring that fits into the air bleeder socket.... make sense?....look at that how thingy below....

damn you sig... u keep making me want the enkei RPF1 when i want the RPM2 as well...



BAH!!!

get a set... I like the RPM's but I think they look like wider stock S5 wheels....nothing wrong with that of course..