I got a rebuilt 13b for my 86 gxl 2x2, its street ported, all i have right now is no a/c, emissions, intake,.. I am going to get a header/presilencer combo from racing beat im pretty sure, and i'd like to do an electric fan aswell while im at it. If i do this do you think my 205K mile secondary injectors will lean out when it gets into the higher rpms? When i did the swap i clean all the injectors and put on all new seals and o-rings if that helps at all? Also, would i benefit at all from hotter spark plugs instead of just stock NGK's? Thanks
|
I think the stock 460's are good to around 200 hp. You might find some more power if you put 87 T2 550 secondaries in and then tune it with an AFC or some device like that.
|
yah i thnk your injectors are gonna be fine. you prolly want colder plugs if anything though
|
460cc should be fine for your engine right now
if you still feel maybe you are leaning out, or are still concerned, then maybe invest in a sort of air:fuel gauge to moderate the mixture i think upgrading the injectors and then having to spend the money on getting a fuel computer to control them. is not worth it at this point |
Originally Posted by FCmaniac' date='Jan 31 2004, 12:55 PM
I think the stock 460's are good to around 200 hp. You might find some more power if you put 87 T2 550 secondaries in and then tune it with an AFC or some device like that.
|
Originally Posted by 88ROTARY' date='Jan 31 2004, 08:44 PM
the 460's will support up to 375hp at 85% dutycycle
i dunno about that.... 1. N/As dont make that kinda power 2. 550s dont even last to that amount of power without going lean maybe you mean 275 HP ????? |
if you still feel maybe you are leaning out, or are still concerned, then maybe invest in a sort of air:fuel gauge to moderate the mixture AF guages don't moderate AF mixture. They tell you what the AF mixture is..... |
Originally Posted by 88ROTARY' date='Feb 1 2004, 12:44 AM
the 460's will support up to 375hp at 85% dutycycle
|
yea i might look for the tII injectors sometime. And i was looking at a getting an a/f ratio guage anyway, but i have another question about that, do i have to make a seperate bung for another 02 sensor or can i just splice another wire into the stock 02 wire ?
|
Originally Posted by JspecRX7' date='Feb 1 2004, 12:28 AM
yea i might look for the tII injectors sometime. And i was looking at a getting an a/f ratio guage anyway, but i have another question about that, do i have to make a seperate bung for another 02 sensor or can i just splice another wire into the stock 02 wire ?
im almsot positive |
All times are GMT -5. The time now is 07:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands