Hi, I have an 87 SE that would flood from time to time. Well anyway i bought the Mazdatrix "injector bleeder" in hope of prevent the flooding. After the kit was installed, the car doesn't want to start. Any idea??? I crank and crank but no use.

Anybody has experience with this? Any help would be appreciated.

um the only thing that comes to mind is that its not installed right, and the only way you can install it wrong is to hook it so the fuel and return lines on the car are hooked together.

did you maybe unplug the egi fuse or fuel pump to install it and forget to plug it back in?

I've check the installation many times. I don't think i got the fuel supply and return line mixed up. Anyway, i took the bleeder off and the car start fine now, weird https://www.nopistons.com/forums/pub...1047683561.gif

My guess is that after the bleeder was installed, somehow the injectors lost pressure or something. Anyway, thanks for all your suggestions.

if its the the piece is upside down it wont work. , make sure the lines are going where they are supposed to and the piece is right side up, then check to see if you have gas in the car and if your fuses and pump is plug back in