CLOCK/IDIOT lights plug i have all the wires that were already pluged into that.



my problem is they were cut along the line of that and im trying to soder them back together.....



althought the one end is from a series 4 and the other end a series 5 therefore some of the colors on the wires are different. the wiring coming from out of the dash is the series 5 the other end that i am plugging into the back of the idiot lights is from a series 4. so i was looking for a diagram that has something that will tell me which colors can go together even though they are not the same colors.



or will that not work because they are two different series? if it cant. do i have to buy a whole new plug and wiring? all the other wiring in my car from the series 5 worked for my series 4, but i guess maybe it wont because im trying to combine the wires?

There are manuals available for download at www.iluvmyrx7.com. They have wiring diagrams there that you might be able to print out and match up the wires. If not, I'd say just get the clock from the series car you are trying to wire up and make your life a lot easier

The wire colors are different because the two clusters are different.... it would prolly make life easier if you went to an s4 cluster.